PDA

View Full Version : [CL9] Clutch master cylinder replacement cost


racerwannabe
28-01-2013, 03:30 PM
Does anyone know the cost to supply and fit a new clutch master cylinder?
Mine's apparently rooted with no pressure at the pedal.
Just want to know what I'm up for.
Cheers.
felixd
28-01-2013, 04:15 PM
check fluid. & bleed the clutch first maybe? cuz if theres air in the system theres will be no pressure at the pedal.

check any leaks too ...
racerwannabe
29-01-2013, 07:02 AM
check fluid. & bleed the clutch first maybe? cuz if theres air in the system theres will be no pressure at the pedal.

check any leaks too ...

Thanks but it happened because I was bleeding the clutch fluid. I think its some dirt particle blocking a passage. Anyway its been creaking for awhile now so I want to get it replaced.
dust_
29-01-2013, 01:11 PM
Does anyone know the cost to supply and fit a new clutch master cylinder?
Mine's apparently rooted with no pressure at the pedal.
Just want to know what I'm up for.
Cheers.

I got quoted $400 from a dealer in Brisbane not long ago. Probably better off buying the parts from the US, might as well get a slave cylinder too.
blommer
29-01-2013, 01:28 PM
Just to let you all CL9 owners know:

the old OEM part number for the clutch master cylinder is 46920-s7a-a03 which is the one that keeps failing.

Honda has replaced it with a superceded part number 46920-s7a-a04. Make sure you are getting this when buying from the dealer. it's about AUD$250.

Wont really trust buying those remanufactured ones from US as they are resleeved from the failed clutch master cylinder. It will still work but not for long. Seen enough complains from tsx forums.
racerwannabe
30-01-2013, 03:19 PM
Thanks for the replies. I've been getting quotes ranging from $350 to $400. Hope this helps for future reference.
blommer
30-01-2013, 04:09 PM
That's like retail plus another cut-throat mark-up % on top of RRP. STEALERSHIP !!
b0xer
06-02-2013, 03:02 PM
Just to let you all CL9 owners know:

the old OEM part number for the clutch master cylinder is 46920-s7a-a03 which is the one that keeps failing.

Honda has replaced it with a superceded part number 46920-s7a-a04. Make sure you are getting this when buying from the dealer. it's about AUD$250.


Can you confirm the replacement master has rectified the knotty/creaking clutch pedal?

I also need to replace a centre armrest/tray lever. Found the part number (83419-SDA-A01 if anyone was wondering).. do I just go to a honda dealer and request these items? I haven't found a stockist that ships to Au
racerwannabe
07-02-2013, 05:39 PM
Can you confirm the replacement master has rectified the knotty/creaking clutch pedal?

I also need to replace a centre armrest/tray lever. Found the part number (83419-SDA-A01 if anyone was wondering).. do I just go to a honda dealer and request these items? I haven't found a stockist that ships to Au

Well so far so good but i've only had the car back for a week! My clutch pedal feels so good now. I highly recommend you replace yours sooner rather than later. I regret not doing it sooner. And yes I've got the new part 46920-s7a-a04.