View Full Version : headers question!
MYEK9
08-02-2013, 04:00 PM
spoon n1 complete exhaust system, what headers would you recommened (reasonable cost headers)
more specific like what engine? b16???
NightKids
08-02-2013, 04:06 PM
RMF :thumbsup:
curtis265
08-02-2013, 04:10 PM
bisimoto
connorling
08-02-2013, 04:11 PM
bisimoto
somehow bisimoto gives 35hp. claimed by the seller LOL
stndrd
08-02-2013, 07:54 PM
Bisimoto is a top quality header that will give great gains if you are happy to sacrifice a/c
mocchi
08-02-2013, 08:51 PM
jdm is best
What's your budget ? Ek9 ?
MYEK9
09-02-2013, 10:42 AM
b16b engine, my budget around 800 , running the whole spoon n1 complete system so want decent headers but good priced. not like toda which are 1,500 loll
I just ripped my mugen 4-1 for b18c off.. b16b has same block height as b18c so any header for b16 wont fit. Still trying to decide if i will sell or not but itd be perfect for your setup and runs a 2.5" collector. I can prob do it for 800 as it has some small dents in bottom and needs a polish on the outside. Previous owner had it ceramic coated inside and out, i had it sandblasted leaving internal ceramic coating but havent got all of it off the outside. Great top end gains from this header and u get that subtle 'boxer' throbbing tone, sounded badass on my spoon n1 cat back. Prob got pics of it throughout my 'spoonin up the eg' thread in the gallery.
Spoon SiRG
09-02-2013, 04:26 PM
spoon n1 complete exhaust system, what headers would you recommened (reasonable cost headers)
If you can afford the complete Spoon N1 catback why don't you get the Spoon Header as well?
There is one for sale @ the parts for sale section.
EKVTIR-T
09-02-2013, 05:39 PM
bang for buck Xforce
or try find a used jdm brand
dorikin
09-02-2013, 06:40 PM
Spoon N1 header here ;)
dougie_504
09-02-2013, 09:35 PM
bang for buck Xforce
or try find a used jdm brand
This.
5Zigen, Fujitsubo and RS*R are all good options. Otherwise PLM or XForce can be had cheap. With your budget though I'd strongly consider the Bisimoto piece.
MYEK9
10-02-2013, 10:05 AM
ill never go xforce, so many bad reviews of headers cracking,!
MYEK9
10-02-2013, 10:06 AM
could you link me to a good site for the bisimoto header please
stndrd
10-02-2013, 11:00 AM
Drop me a PM for pricing on Bisimoto header
Benson
10-02-2013, 12:15 PM
PLM TA's would bolt-up to your exhaust system. Best bang for buck header on the market
MYEK9
11-02-2013, 03:04 AM
link me benson if you could :D
MYEK9
11-02-2013, 03:05 AM
and i checked out the bisimoto header wow wee such a wierd design!
dougie_504
11-02-2013, 03:51 AM
It's deliberate. The primaries are designed like that to optimise ground clearance and power (by making the individual tubes equal length).
Benson
11-02-2013, 08:55 AM
http://au.images.search.yahoo.com/images/view;_ylt=A2oKiHIyJRhRZQUA4DYN5gt.;_ylu=X3oDMTBlMT Q4cGxyBHNlYwNzcgRzbGsDaW1n?back=http%3A%2F%2Fau.im ages.search.yahoo.com%2Fsearch%2Fimages%3Fp%3DPLM% 2BTA%2Bheader%26n%3D30%26ei%3Dutf-8%26y%3DSearch%26fr%3Dchr-greentree_ff%26tab%3Dorganic%26ri%3D1&w=500&h=338&imgurl=www.swapshopracing.com%2Fcontents%2Fmedia%2 Fplm-hb18-ta-header-2.jpg&rurl=http%3A%2F%2Fwww.swapshopracing.com%2Fcontent s%2Fen-us%2Fd1111_Private_Label_Manufacturing_Headers.htm l&size=29.9+KB&name=%3Cb%3Eplm%3C%2Fb%3E-hb18-%3Cb%3Eta%3C%2Fb%3E-%3Cb%3Eheader%3C%2Fb%3E-2&p=PLM+TA+header&oid=c37ccc596f928704fbb1df9c37e4b16c&fr2=&fr=chr-greentree_ff&tt=%253Cb%253Eplm%253C%252Fb%253E-hb18-%253Cb%253Eta%253C%252Fb%253E-%253Cb%253Eheader%253C%252Fb%253E-2&b=0&ni=84&no=1&ts=&tab=organic&sigr=12roop4aa&sigb=13reghue1&sigi=11uut6kch&.crumb=eY/hbKjsPpb
Same design as Toda without the heavy price tag. Some results shows within 1/2 hp of the real deal
MYEK9
12-02-2013, 12:18 AM
nice, could you link me on where to buy the PLM TA and should i be going 4-1 or 4-2-1
dougie_504
12-02-2013, 12:40 AM
4-2-1
MYEK9
13-02-2013, 06:26 PM
many people are telling me to go 4-1 , im so confused argh
curtis265
13-02-2013, 06:31 PM
4-1 will give top end gains, 4-2-1 will give you more midrange torque. comes down to what you prefer
it will make you read higher on the dyno and faster over long drag races, but for a short race the 4-2-1 will outperform it
MYEK9
13-02-2013, 09:23 PM
i reckon j's racing 4-2-1 headers or the tiegwa that @MR.Grim told me about , they are an identical replica of Toda Headers, and are only $700
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.