Integra vtir parts into civic eg5 vtec

[pheestyle]

Hey all,

Just wondering what parts can be grabbed from a vtir integra and placed into my civic hatch eg5.

There's a guy in Adelaide which is wrecking his teggy and I wouldn't mind getting parts which would benefit my civic if his parts are affordable.

Any opinions would awesome

[dougie_504]

Plenty of them will fit, but I doubt many of them would 'benefit' you so to speak. The suspension components (shocks/springs, sway bars, control arms, camber arms etc) are all compatible but probably the same/you wouldn't see any real improvement unless he has aftermarket pieces.

Engine will fit with some fiddling (not an easy job necessarily) but would be more fun that your D16.

[stndrd]

Best thing to get would be 262mm front brake upgrade with brake booster and master cylinder

[fillit]

I find that the seats are a little better too, gives a semi bucket feel opposed to the ones in the eg.

Sway bars are still 21mm front and 14mm rear from memory. So no difference.

[Evok]

Front brakes, drum > rotor upgrade.
steering wheel
DC2 dash
DC2 Shifter
DC2 seats ( Sits lower )
DC2 front ( DIY )
Suspension, all. control arms, etc.
DC2 floor mats
Sway bars
Exhaust ( slightly needs to be modified )

b18c2 fits in eg, b18b fits in eg

[fillit]

Front brakes, drum > rotor upgrade.
steering wheel
DC2 dash
DC2 Shifter
DC2 seats ( Sits lower )
DC2 front ( DIY )
Suspension, all. control arms, etc.
DC2 floor mats
Sway bars
Exhaust ( slightly needs to be modified )

b18c2 fits in eg, b18b fits in eg

He has an EG5, which the suspension is almost identical to a VTIR.

He already has rear disk brakes which are same size as VTI-R
DC2 Dash needs cutting
DC2 front - really?
Suspension - they are exactly the same in an eg5.
Sway bars - as above
Exhaust - it's rarely worthwhile to cut and reweld an oem exhaust, rather custom 2.25" or something.

[GU357]

is the sway bar really the same? thought DC2 would have a better one.

[fillit]

is the sway bar really the same? thought DC2 would have a better one.

dc2r has a better one.

JDM '96
24mm (f) 22mm (r)
JDM '98
25mm (f) 23mm (r)

AUDM is 24mm

On the VTI-R the rear sway bar is 14mm