wheel bore size

[blackwhat]

quick question, what are the chances of fitting a wheel with a 56.1mm centre bore on a hub with a 56.6mm centre bore??

can i force it on, or will it require some work to be done?

thanks :D

[JDM DC2R]

0 LOL 5mm alot And i wouldnt modify it to fit!

[junoki]

i was gonna suggest hub rings but looking at the sizes you supplied, thats not an option

your wheel bore is bigger than your hub, thats not gonna work

i think looking into different wheels is a better option

[JDM DC2R]

i was gonna suggest hub rings but looking at the sizes you supplied, thats not an option

your wheel bore is bigger than your hub, thats not gonna work

i think looking into different wheels is a better option

Other way around the hub is bigger then the wheel bore size

[blackwhat]

its a 0.5mm difference, was thinking sanding/dremel the wheel bore just a tad?

[duzy]

IMO I'd recommend getting a shop to do it, they have the correct tools and methods etc
Shouldnt cost you too much

Then you gotta re-balance the wheels after etc.

[DreadAngel]

Depending on the design on the wheels though, it might not be an option...

Be sure to check the amount of material left between the centre bore and the wheel nut holes... That would be my biggest worry...