the_joker
19-03-2013, 09:51 AM
Hey all,
This car is For Sale
The car is complete, registered and running (very well). Will come with roadworthy and 6 months rego still on it. All the hard work is done and is ready for its first trip down the drag stip, I don't live near a strip so I don't have any times or even a guess at how much power it makes. A friend of mine had a B20 vtec crx and this has much, much more torque on tap just for some reference. The car is painted Candy red with black ontop, the bonnet is painted unlike the photo below. Car is located in Gympie, QLD. Welcome to come for a test drive but please no time wasters as I need this car sold in the need month. Asking $6000. The engine swap alone cost more than $6000 but I just need this car sold so come grab a great setup.
Just a brief description of parts:
H23a Vtec
Y1 Gearbox
QSD adapter kit
Innovative Mounts
Hondata S300
Innovative traction bar
Hardrace front upper camber arms and a lot more!
I've got a H2B crx and thought some people may be interested to view it. The engine is actually a H23A vtec (blue top) mated to a Y1 gearbox with a QSD kit. There's alot of other parts that went into the mix to make this work but I'd take for ages going over the car to try and name everything, plus it took me a few years to get this all together and registered from scratch.
But pretty much bought the car in a shabby state(not even running) and swapped d16's in and out and finally went for the H2B conversion because it fit with off the shelf parts and imense torque. I did everything mechanical myself from removing balance shafts to wiring to puting the engine in, out, in, out, in and a few more times out. But when it came to starting it up all the injectors died:confused: so because I don't have that much wiring skills it went to HiPower Racing for intial start up and tune. Unfortunatly i had a bad clutch so no tune :( oh and they also fitted a S/S exhaust.
Before the convo I painted it two tone candy red/black with a boom2 body kit which is still not on just yet.
I have many photos but only in build process ATM, so i put up the one that resembles what it's most like today(i'l take a better pic a bit late)
This car is For Sale
The car is complete, registered and running (very well). Will come with roadworthy and 6 months rego still on it. All the hard work is done and is ready for its first trip down the drag stip, I don't live near a strip so I don't have any times or even a guess at how much power it makes. A friend of mine had a B20 vtec crx and this has much, much more torque on tap just for some reference. The car is painted Candy red with black ontop, the bonnet is painted unlike the photo below. Car is located in Gympie, QLD. Welcome to come for a test drive but please no time wasters as I need this car sold in the need month. Asking $6000. The engine swap alone cost more than $6000 but I just need this car sold so come grab a great setup.
Just a brief description of parts:
H23a Vtec
Y1 Gearbox
QSD adapter kit
Innovative Mounts
Hondata S300
Innovative traction bar
Hardrace front upper camber arms and a lot more!
I've got a H2B crx and thought some people may be interested to view it. The engine is actually a H23A vtec (blue top) mated to a Y1 gearbox with a QSD kit. There's alot of other parts that went into the mix to make this work but I'd take for ages going over the car to try and name everything, plus it took me a few years to get this all together and registered from scratch.
But pretty much bought the car in a shabby state(not even running) and swapped d16's in and out and finally went for the H2B conversion because it fit with off the shelf parts and imense torque. I did everything mechanical myself from removing balance shafts to wiring to puting the engine in, out, in, out, in and a few more times out. But when it came to starting it up all the injectors died:confused: so because I don't have that much wiring skills it went to HiPower Racing for intial start up and tune. Unfortunatly i had a bad clutch so no tune :( oh and they also fitted a S/S exhaust.
Before the convo I painted it two tone candy red/black with a boom2 body kit which is still not on just yet.
I have many photos but only in build process ATM, so i put up the one that resembles what it's most like today(i'l take a better pic a bit late)