B series swap - What is this wire

[kcokla]

This wire was cut during my b series swap by accident as the color was mistaken

can someone identify what its supposed to be/do?

I do have 1 engine code which at this stage I wont identify which im hoping someone else can identify based on the rouge wiring being disconnected.

Reason for this is so i dont throw peoples thoughs on what it may be off etc into a wrong direction'
https://www.dropbox.com/s/s5mw2at0t70t62p/IMG_20130324_112238%5B1%5D.jpg

https://www.dropbox.com/s/s5mw2at0t70t62p/IMG_20130324_112238%5B1%5D.jpg

the black one just hanging there - its not black ive just heat shrunk it to close off that area.

https://www.dropbox.com/s/dpqytdqv8poevwu/IMG_20130324_112253%5B1%5D.jpg

https://www.dropbox.com/s/dpqytdqv8poevwu/IMG_20130324_112253%5B1%5D.jpg
it is GREEN and WHITE - not green and yellow.

it is NOT the vtec wire.


Hope someone can help

its located next to the shock tower on the passenger side if you cant tell from the photos.

thanks.

[mocchi]

use multimeter and trace it to sensor. sometimes the yellow would kinda fade and make it look white.

[mocchi]

oh lol wire is cut eh, cant see pics on tapatalk

[hmetro24]

http://img682.imageshack.us/img682/2240/shocktowerplugpinouts.png

[mocchi]

so its missing a connector at the shock tower plug?
check with multimeter.

looks like WHT/GRN or could be YEL/GRN
wording of your post makes me think its GRN/WHT

[kcokla]

use multimeter and trace it to sensor. sometimes the yellow would kinda fade and make it look white.

It was cut cause the white was mistaken for yellow!