PDA

View Full Version : B, K gearbox rebuild kits



chez00
17-04-2013, 02:57 PM
We've put a couple of popular kits together for those wanting to rebuild their own gearbox. The kits are comprehensive: a lot of sellers don't include things like lock nuts, diff bearings, retainer clips, snap rings, spacer shims etc. Our thoughts are that you might as well do things properly if you're undertaking such a large job as a gearbox rebuild. We have no idea how you properly rebuild to factory specs without these items.

Here's what you get:
All genuine Honda parts:
- input bearing front
- input bearing rear
- counter bearing front
- counter bearing middle
- counter bearing rear
- 2 x diff bearings
- bearing snap ring counter rear
- input snap ring shim*
- diff spacer shim*
- countershaft spacer shim* (K series only)
- countershaft lock nut /bolt
- input shaft seal
- 2 x diff seals
- selector shaft seal
- dust boot
- FREE shipping anywhere in Australia

Price:
K series: $319
B series hydraulic: $319
B series cable: $299
D series: $299

Here's how it works: We send you out all the parts except the shims/spacers. You do your trial assemblies with the new bearings, take your measurements and then we send out the correct shim size for your application. This is the only way that you can properly assemble a gearbox with the correct bearing clearances and preloads without purchasing every shim!

EKVTIR-T
17-04-2013, 02:58 PM
Do you sell single bearings for g'box?

and what brand are they

chez00
17-04-2013, 03:03 PM
Do you sell single bearings for g'box?

and what brand are they

Yes, and everything is genuine Honda including bearings. PM what you're after and I'll get you price and availability.

1.mile
17-04-2013, 03:33 PM
Can you source synchro rings for a b series gearbox??

chez00
17-04-2013, 03:38 PM
Can you source synchro rings for a b series gearbox??

Yes. I have a few options, pm me what you need, and for what model and I'll let you know price and availability.
Thanks.

chez00
28-06-2013, 11:28 PM
B cable and D series kits added. 2 x B kits sold this week.

zedries
04-10-2013, 03:05 PM
Hey Sam I have a B20A gold top prelude. It is a JDM car and I was hoping to get a rebuild kit for the Auto Box - yes I will convert it to manual when I get the manual box from NZ...

In the mean time I believe the internals are similar if not the same as the A20A gearbox. Can you help a brother out?

Zaahir

chez00
05-10-2013, 05:10 PM
Hey mate that should be fine- what exactly do you need to replace? Pm me and I'll price you up.

zedries
05-10-2013, 06:07 PM
I think the clutches are all shot so probably need a full rebuild?

I will PM you when I pull it apart if that makes things easier?

Zaahir

chez00
06-10-2013, 11:30 AM
Yep I've got a listing for your trans (is your Prelude a BA1?) - I will need the transmission number as the clutches vary between early and late. The trans number should be something like 6129596.

zedries
06-10-2013, 09:01 PM
you are quite correct - it's a BA1 prelude.

I have 2 transmissions - 1 is in my parts car and the other in my daily driver. I used to have listings but they were misplaced. I recall the parts being very similar to the A20 auto transmissions as I began to gather parts. Anyway, will get the number off my parts car when I go to my storage.

Zaahir

grifty
07-10-2013, 04:16 PM
Got anything for a D series L3 4WD box? 88-91 Civic Wagon.

chez00
07-10-2013, 05:11 PM
Got anything for a D series L3 4WD box? 88-91 Civic Wagon.

All my listings say that the MA3 is a ZC? Some of the parts are same as the 2wd box, some are different. Tell me what you need and I'll quote you (bearing and seal kit, or do you need synchros, hubs etc?). I have pretty much all D series bearings and seals in stock, longest wait will be up to 3 weeks for anything I don't have, usually quicker.

grifty
07-10-2013, 05:32 PM
Yep MA3 is a ZC motor. Need bearings, seals, synchros, 2nd gear and 2nd gear hub.

Cheers.

chez00
07-10-2013, 09:27 PM
I'll pm you a quote - there are A LOT of bearings in this thing, haha.

chez00
31-03-2014, 09:56 AM
All kits back in stock - awesome value on these.