92 integra da9 car cranking not starting!

[DA9teg]

hey guys i have a 92 integra ls, the other day i parked the car at the shops, did my thing and came back around 25 minutes later, car wouldnt start, engine light stayed on and was cranking but no go, tried push starting and still no luck, checked for spark through the leads and there wasnt any so ive just replaced the ignition coil and rotor hoping it would do the trick but still zilch, any ideas on where to go from here? thanks!

[EKVTIR-T]

Can you hear the fuel pump prime then click off when you turn the key to ON before cranking starter?

95% it will be Main Fuel relay



http://www.youtube.com/watch?v=kY_GnVwOF9U

[DA9teg]

nope, cant hear it prime i just checked then, so in the 5% case that it isnt the main relay what else could it point to??

[EKVTIR-T]

It has to prime then click off


if it doesnt click off then the relay is dead

[DA9teg]

thanks for the advice, is the car not starting related directly toward an electrical issue though?

[grifty]

thanks for the advice, is the car not starting related directly toward an electrical issue though?

I would say so, follow that repair guide video posted earlier. It should most likely fix your issue.

[DA9teg]

should i check if theres any fuel pressure first?

[Jon_51]

+1 for main fuel relay. if you're in Brisbane I've a got a spare you can try out, but that DIY fix should get the job done

[grifty]

should i check if theres any fuel pressure first?

Dude just solder it already!!!!

It doesn't cost you anything and takes like 5-10 mins

[Daveho1]

damn it drifty, cant you see question time isnt over?

for real though, guy hurry up and try the fix.... the only thing faster is checking the fuse. but if you cant hear the pump prime can you see why checking fuel pressure may be a tad unnessisary??

[93Integra]

Definitely main relay.

Mine is on the way out but I don't have access to a soldering iron. Generally only stops working on hot days or after long periods of driving, giving it a tap usually gets it to click.

[mocchi]

Definitely main relay.

Mine is on the way out but I don't have access to a soldering iron. Generally only stops working on hot days or after long periods of driving, giving it a tap usually gets it to click.

lol dont have access.
who doesnt have access to $10

wat

[djkng]

I was having relay issues and not too long ago, i was at beaurepairs and car wouldn't start, walked all the way up to Honda with my relay (2km up the road), and they didnt have any. So i walked all the way back put the relay back in, and still wouldnt start, and to my realisation, it was only a blown fuse...

So i suggest also checking the fuse.

[DA9teg]

alright! heres the update, checked the ecu for error codes and showed up with nothing, changed main relay, still nothing, went throughout the whole car and checked every fuse and relay created for it, all were beautiful and working.
its hurting me! >.<

[DA9teg]

bump! could this be the doing of a faulty ecu if the cel light wont go off?