DIY EK9 Wing lifters

[viinnh]

Disclaimer: The following is provided as a GUIDE ONLY, and neither myself nor Ozhonda take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!


Aim: Lift your EK9 wing up a bit with out using the brackets which look like shit
Required: spacers/nuts/gromets
Steps:
-Remove your stock EK wing by removing the plastic under the boot then the 4 screws
(NO PIC)

-Take off the base plate from the ek9 wing and add spacers/nuts/gromets/whatever you want to slide on to the rear stud on both side. the more it is the more lifted the wing
http://i42.tinypic.com/70hm49.jpg

-Here I have just added enough to be inline with the stock stud. Put the base plate back on and bolt it down using the other stud
http://i42.tinypic.com/2znqq00.jpg

-Final result
That little tilt makes a big difference in real life
http://i40.tinypic.com/2eyurs1.jpg

From the back still looks stock with out that weird bracket look
http://i42.tinypic.com/2zz0zl4.jpg

Couldn't get the best photos and angle as theres another car in the way to get a side on shot
http://i43.tinypic.com/1ooq5u.jpg

http://i39.tinypic.com/c6ipy.jpg

http://i42.tinypic.com/33epfk1.jpg

For OEM or spoon wing refer to this DIY I have made.
http://www.ozhonda.com/forum/showthread.php?159024-DIY-Stock-EK-LIfters

[viinnh]

http://i40.tinypic.com/2991mt.jpg

[eren]

Mad, I hated the lifters everyone uses , this looks more tidy and part of the car.nice job!

[EKVTIR-T]

Looks alot better than with those gay lifters

[mocchi]

Looks alot better than with those gay lifters

theyre rare jdm item ok m8

worth $300

[EKVTIR-T]

theyre rare jdm item ok m8

worth $300
I kno they are very worth as jdm item,it using special jdm aluminium

but I just dont enjoy the looking of that design for ek

[mocchi]

I kno they are very worth as jdm item,it using special jdm aluminium

but I just dont enjoy the looking of that design for ek

http://www.ozhonda.com/forum/customavatars/avatar2484_212.gif

[JDM-derek]

kinda of the lifters....



half of cabramatta run lifters ><

[ctx]

kinda of the lifters....



half of cabramatta run lifters ><

Cabramatta lifters

inquire within

[EKVTIR-T]

thats racist