View Full Version : Ecu discovery?
ok guy i pulled out my ecu today cause im just getting myself ready for a turbo install.... when i got it out i found this...
http://users.tpg.com.au/adslfl4m/civic/ecu3.jpg
http://users.tpg.com.au/adslfl4m/civic/ecu2.jpg
http://users.tpg.com.au/adslfl4m/civic/ecufront.jpg
now i have looked around and cant find anything i have no idea what this is?? could i have just pulled out something else... its under the glove box like where normal ecus are right?...
this only has 2 rows of pins but normal honda ones have 3 plus there is only 2 plugs.... hummmmm please help
i have been to http://www.hondata.com/techecuid.html and looked but looke nothing like any of them....
ProECU
24-03-2005, 08:17 PM
What engine / car is that ecu powering currently?
The P2K is from a 96 Civic EK1 GLi SOHC (http://www.pgmfi.org/twiki/bin/view/Library/SOHC) non-VTEC (D16Y4)
oh btw: Its OBD2A
yeah i found it on turbod16.com. Now i just have to find out what gose where all over again.... sad....
btw dose anyone know if the rpm gose in to the igintion paluse?? for this ecu?
ProECU
24-03-2005, 09:05 PM
your welcome...
oh sorry and thank you for helping out. i got the info from you and then i wentr to check it out
thank you againa and sorry for being so rude...
ProECU
25-03-2005, 09:47 AM
no problem, just giving you shit
ECU-MAN
26-03-2005, 11:47 PM
']yeah i found it on turbod16.com. Now i just have to find out what gose where all over again.... sad....
btw dose anyone know if the rpm gose in to the igintion paluse?? for this ecu?
get your ignition pulse from the blue wire on the RH strut tower single pin connector
thanks
another question... i am going to hook up a emanage to this ecu but the emamage come with 4 wires for each injector.. but this ecu only has 2 outputs for all for injectors... and ideas??...
would it be a problem if i just put the 2 from the emanage to the 1 on the ecu??
ECU-MAN
27-03-2005, 02:08 AM
not thats not a good idea, do you have a shematic for your ecu or PGMFI system.
if u need a pinout, i know a guy who went to the local honda dealer and got a photocopy from thier workshop manual.
i already have the pinout. but the thing is for this ecu there is only 2 outputs that control all 4 injectors not like yours weq. you have one for each. But the emanage has 4 outputs that is supose to go to each injector output from the ecu. can anyone understand me??
emanage has 4 outputs for in 4 output from the ecu to injectors. But this ECU only has 2 outputs for all 4 injectors...so if i just put 2 from the emange to the 1 from the ecu is that going to have any effects on the ecu or emanage?
HELP PELASE
ECU-MAN
28-03-2005, 10:23 PM
']i already have the pinout. but the thing is for this ecu there is only 2 outputs that control all 4 injectors not like yours weq. you have one for each. But the emanage has 4 outputs that is supose to go to each injector output from the ecu. can anyone understand me??
emanage has 4 outputs for in 4 output from the ecu to injectors. But this ECU only has 2 outputs for all 4 injectors...so if i just put 2 from the emange to the 1 from the ecu is that going to have any effects on the ecu or emanage?
HELP PELASE
yes it will because you will be pulsing the injectors double time, and your engine will run rich. send me a copy of your pin outs
This is the pin outs in found from www.turbod16s.com (http://www.turbod16s.com)
http://users.tpg.com.au/adslfl4m/civic/bconnector.pnghttp://users.tpg.com.au/adslfl4m/civic/aconnector.pngThank you for helping out..
ECU-MAN
30-03-2005, 11:04 PM
thanks alot M*
iv been wanting that for a while
cheers
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.