Tapping for 12V in CM Accord

[stevo1210]

Hi Everyone,

Just planning to install some DRL lights in my parents 2007 Accord VTi. Not sure where the best place to tap for 12V would be in the car? I was planning to tap from the 12V socket as that's the ACC line but I reckon it's a bit too far and I reckon that there is a source somewhere in the engine bay maybe?

Any help would be good.

Thanks.

[Daveho1]

its not uncommon to tap into the front parkers. but at the same time you could just make a new circut.

[Chernoby1]

Lots of places to get it from. A new circuit would probably be the best way.

Battery + > Relay contactor A
Relay contactor B > DLR > Battery -

Relay coil on acc line.

Not very difficult to do/ i understand that my description of how to do it might be confusing but i cbf drawing up a curcuit diagram right now hahaha. If you want me to draw it up i can just not today :)

[stevo1210]

Okay, I kinda get what you mean with those instructions. I'll look for relays as you said.

What about inside the cabin? I was gonna install a 7" JVC monitor separate to head unit but is there a tap location for constant 12V and also ACC 12V in the fusebox by the drivers foot?