DIY (CU2) - Remove passenger door interior panel

[steeler]

Tools that might come in handy:
https://dl.dropboxusercontent.com/u/3555942/Ta%20av%20bakdoer%20accord/01a.jpg

Then do in following order :
https://dl.dropboxusercontent.com/u/3555942/Ta%20av%20bakdoer%20accord/01.jpg

https://dl.dropboxusercontent.com/u/3555942/Ta%20av%20bakdoer%20accord/02.jpg

https://dl.dropboxusercontent.com/u/3555942/Ta%20av%20bakdoer%20accord/03.jpg

https://dl.dropboxusercontent.com/u/3555942/Ta%20av%20bakdoer%20accord/04.jpg

https://dl.dropboxusercontent.com/u/3555942/Ta%20av%20bakdoer%20accord/05.jpg

https://dl.dropboxusercontent.com/u/3555942/Ta%20av%20bakdoer%20accord/07.jpg

https://dl.dropboxusercontent.com/u/3555942/Ta%20av%20bakdoer%20accord/06.jpg

https://dl.dropboxusercontent.com/u/3555942/Ta%20av%20bakdoer%20accord/08.jpg

https://dl.dropboxusercontent.com/u/3555942/Ta%20av%20bakdoer%20accord/09.jpg

https://dl.dropboxusercontent.com/u/3555942/Ta%20av%20bakdoer%20accord/10.jpg

https://dl.dropboxusercontent.com/u/3555942/Ta%20av%20bakdoer%20accord/11.jpg

[ExpressCoffee]

Awesome! I suppose this is the same with the front passenger side door. I've been meaning to locate the rattle in my speaker so this is great! thanks! :)

[steeler]

The front doors are mostly the same, but there are some differenses:
1) you first have to remove the tweeter covers
2) there is an additional cover in front of the door opening handle that you need to take of to get to a screw
3) the plug for the door opening mechanism has a white plastic lever that needs to be opened (you have to press in a part of it while turning it)
4) you dont have to remove the light plug because it has an additional plug you can release of instead

Also I didnt take of the metal part that holds the door opener, it might not be necessary in the back doors either.