k20a eg civic tucked and shaved bay!

[K20a-eg]

heres my eg civic that im gonna k swap, its a eg3 civic 1994 jap import with 112kms on the clock!

ive done a few k swaps for customers but this is for me so gonna try and make her a sweet machine. hope ye enjoy

25208252192521825217252162521525214252132521225211 252102520925220

[K20a-eg]

car all stripped and off to the painted in ford focus frost white!

[K20a-eg]

when the car returned from the painters , stripped all underbody and removed fuel tank all susspension arms.
the whole underbody was completely wire brushed and old sealer reomoved and re sealed and schutz underneath.
all my suspension arms were de bushioned and sandblasted and powdercoated black.
i then fitted a full powerflex bushion kit to all the arms and fitted 96 spec dc2 4x114 hubs with the 98 spec bigger brake callipers using a prelude discs.
a dc2 type r subframe was sent of to be painted in purple and when it returned i fitted the 98 spec dc2 steering rack to the vehicle!
i fitted the fuel tank with a walbro pump and fitted it to the car! thats the under side done!

[K20a-eg]

25230252292522825227252262522525224252212522225231

[K20a-eg]

after that i got dc2 spec wheels powerder coated in white wrapped them in apair of toyo proxes and fitted them up
i started to refit the window and put back in the dash reloactiong the fuse box and brake pipes under the dash also. i got the dash flocked like the wrc spec cars and put in my sir jdm clock.

i fitted up my dash dodger cage also and bolted it in
i ran all the wires for the lights fans horn inside the valace of the car not to spoil the flushed and tucked look

[K20a-eg]

next up was the engine, which i treated to a fully rebuild using acl race bearings, new chain ,tensioner ,rings, head gasket and all other bits needed, i then fitted my twm 52 mm itbs and ac p/s relocation kit and enameled the engine in silver. next was the gearbox which i stripped and checked for any syncro damage which was fine so i fitted a spoon 5.78 final drive and also treated the engine to a lightend fly and a exceedy paddle clutch.

[K20a-eg]

252332523425235

[carayan]

Wow this looks the goods! are those are itbs i spy?

[EKVTIR-T]

very cool

[K20a-eg]

ya 52mm itbs. but ive a rbc to go on her also!

[PHO]

Looks fkn sweet man

[EG5]

Cool project

[Vvvtec]

next up was the engine, which i treated to a fully rebuild using acl race bearings, new chain ,tensioner ,rings, head gasket and all other bits needed, i then fitted my twm 52 mm itbs and ac p/s relocation kit and enameled the engine in silver. next was the gearbox which i stripped and checked for any syncro damage which was fine so i fitted a spoon 5.78 final drive and also treated the engine to a lightend fly and a exceedy paddle clutch.

http://24.media.tumblr.com/c227057f1e38278c1319c97bbf9ccfeb/tumblr_mmi2qfqA5l1qdlh1io1_400.gif (http://www.google.com.au/url?sa=i&rct=j&q=shocked%20reaction%20gif&source=images&cd=&cad=rja&docid=7gTcX8MoVHKkAM&tbnid=D3CzcyHYpp06RM:&ved=0CAUQjRw&url=http%3A%2F%2Fwww.tumblr.com%2Ftagged%2Fshocked&ei=8XHdUY-DGMewkAXSloGQAw&bvm=bv.48705608,d.dGI&psig=AFQjCNHim0ytcaCEQ52EkiZtKOVB1sosVw&ust=1373553296958705)

Awesome project man

[K20a-eg]

thanks fella, i left out alot of what was entailed in a lot of jobs cause i didnt take many pictures, but ye get the jist of it!

[VT3C]

it's hard to stop n take photos step by step when u tryin to smash out the work at the same time ! looks like a great project - looking forward to seeing it when u move to Perth :)

[euRo_noob]

Damn.... dis looks gudddd

[IEVAQ8]

nice champ...

I have a couple of wheel selections if ur keen...lol