camber settings?

[mugen_ctr]

quick help guys, goin in for wheel alignment 2mrrw, but need info on what camber settings are best...

Previously i ran 1.5 fronts n 0.5 rears with 16x7 +35 195/45R16 zero rubbing issues

Now with 15x8 +25 205 50 15 getting some serious rubbing on rears, with mild rolled rear guards..

How much camber can i dial in before its too stance hectic? what i meant to say was sensible camber settings

Fronts -3.5
rears -2.5

enough clearance?

[Riced_Civic]

my mate had that wheel set up and had to run -4 all round with rubbing on full lock

[DakDak]

I wouldnt go any higher than 2.5 front and rear.

Ideal for a track and street driven set up

[mugen_ctr]

yeahhh cheers guys for the input, will also talk to the guys doing it as ask for there opinion

[stndrd]

I ran -2.5 rear with a +18 offset and 205/50R15 semi. Worked well but had to rase the car slightly to clear.

As dakdak said dont go more than -2.5 on the front

[Evok]

-2 front 195/50/15 on 15x8
-1.5 in the rear, no scrub. semi finger gap...

ran -3 front and -2.5 on rear before...wasn't really needed for street..+ too long for tyres to warm up at night.

[mugen_ctr]

yeah sweet cheers guys will go -2,5 front n -1.5 rears

atm its sitting around half finger gap, so hoping it works out well

[dougie_504]

Get your rear guards pumped out a little, otherwise just run proper wheels/tyres!

[blu]

Get your rear guards pumped out a little, otherwise just run proper wheels/tyres!

where can i go so someone will pumped out my rear guards man..?

[stndrd]

Message user oxer for good prices on rolling

[blu]

Message user oxer for good prices on rolling

where is he located josh..? thanks..

[EKVTIR-T]

where can i go so someone will pumped out my rear guards man..?here man http://www.advancetyres.com.au/

[mugen_ctr]

Get your rear guards pumped out a little, otherwise just run proper wheels/tyres!

hahaha too late man, i was thinking the same when i fitted em up, they are too wide, but funny that when viewed in pictures 15x8 sit flush :/

maybe its just my camber settings are outta wack! seems the rears have too much positive camber....

one shop has already refused to touch it, unless i leave it with them for the "whole day" LOL, what a joke, doesnt take a whole day to do camber settings for a street car, on the hunt for a new shop that does it on the spot

[stndrd]

Take it to Traction Tyres in Rowville brah

[baethos]

I'm running -3 and -3.5, probably could run less but I'll see how long my tyres last. Adjusted the camber myself, just enough so my tyres don't rub. The wheel alignment shop just had to correct the toe. Camber was equal both sides.

[blu]

guys i got 15x8 +25 with stretch tyres 185/55r15.. what camber setting should i got..?

[mocchi]

-9000

[dougie_504]

-9000

So you want to run 0 camber? Will rub :D

[blu]

does anyone has the number and know the location of oxer can't pm him he's inbox is full..