View Full Version : FN2 Steering wheel squeal sound
Sitwy
12-07-2013, 01:03 AM
hi guys, recently the steering wheel inside the interior have some squealing sound when turning...
how can I apply greaser to make it smooth? or just wd40?
lolmclol
12-07-2013, 01:27 PM
WD40 will wash away really easily
You'll need to use proper grease
RenzokukenJ
12-07-2013, 01:42 PM
WD40 will wash away really easily
You'll need to use proper grease
this/10
just take the wheel off (disconnect the battery before, and dont knock the airbag around) and rub dat grease
wd40 will just be a temp solution
Sitwy
12-07-2013, 05:47 PM
I am worry about the airbag too... just disconnect the Positive will be fine?
just wondering how to take the wheel off?
RenzokukenJ
12-07-2013, 06:14 PM
I am worry about the airbag too... just disconnect the Positive will be fine?
just wondering how to take the wheel off?
Should be some write ups on how to take it off, with FN2 Im not sure with the controls and all how that would work lol
jprak
12-07-2013, 06:31 PM
http://www.8thcivic.com/forums/diy-honda-civic-interior-style-mods/294034-diy-redline-goods-06-11-civic-leather-steering-wheel-wrap-install.html
read where he starts taking off the wheel, dont mind reading the rest ;D
Grayfox
12-07-2013, 11:36 PM
Don't use WD40.
It is a degreaser, so it will just make it worse
curtis265
13-07-2013, 11:35 PM
wd40 isn't degreaser...
Grayfox
15-07-2013, 08:45 AM
It is not a proper degreaser, but it will still remove some grease.
Just look it up.
Powered by vBulletin® Version 4.2.2 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.