PDA

View Full Version : Gearbox noise?


Ep3r_
15-07-2013, 08:23 PM
When i accelerate i hear crucccc sound and when i decelerate i hear it too neutral nuthin clutch in nuthing? any1 know wat the sound is
RenzokukenJ
15-07-2013, 09:04 PM
Like a bearing noise?
integraR
15-07-2013, 09:09 PM
wats the condtion of your engine mounts?
Ep3r_
15-07-2013, 09:10 PM
i dont fink its the engine mounts, friends says its gearbox?
u mad?
15-07-2013, 09:32 PM
almost like a straight cut dog box when u jump on or off the throttle?

like a cha cha cha sound?
Ep3r_
15-07-2013, 10:07 PM
yeh sumthin like that?
stndrd
15-07-2013, 11:22 PM
You do this a bit to often bud. It is impossible to diagnose a sound on a public forum. Please upload a recording of the sound to make life easier for everyone
DreadAngel
15-07-2013, 11:37 PM
you do this a bit to often bud. It is impossible to diagnose a sound on a public forum. Please upload a recording of the sound to make life easier for everyone

rep!!!

EDIT: Must spread reputation...
Ep3r_
16-07-2013, 12:27 AM
tried recording very hard to hear it
integraR
16-07-2013, 01:32 PM
i dont fink its the engine mounts, friends says its gearbox?

just checking cos ep3 well known to have ruined engine mounts
and my m8 replaced them and it helped with the vibrations
simmy
16-07-2013, 02:12 PM
pm charliebrown, he had this problem before
Daveho1
16-07-2013, 07:31 PM
go to bunnings and buy rebuild kit brah
Baby Face
16-07-2013, 10:08 PM
i rebuilt my gearbok @ bunnings, very friendly staff
lolmclol
17-07-2013, 10:37 AM
guies pls

Mitre 10 for gearbok rebuild, its Mitre 10, 10 out of 10, everytime!
Daveho1
20-07-2013, 09:58 AM
be full of care mates talkn bout dem bunnings rebuilds will get you an infraction like me....
i learnd my lezzon soz for spaming on ur faces n8s
Rage King
26-07-2013, 04:19 PM
OP

got same noise on my GD Jazz. If your shifter is going into all of the gears smoothly without any crunches or stiffness, then its most likely your spiggot/thrust bearing (clutch bearing) is goneskies.

It will not cause any other further damage but is a pain in the arse hearing it as you take off. If the noise is really pissing you off, then there is no point just changing this bearing without changing your clutch as well.

kill two birds with one cumshot! = wynnings!

srs
Daveho1
26-07-2013, 06:03 PM
fark he right n8 go it cum on spiigot for better noises
Baby Face
26-07-2013, 06:23 PM
get cumlube mobile
Rage King
26-07-2013, 08:09 PM
incase people are confused its spiggot bearings and not pigeon ..

below are the differences;

SPIGGOT
http://www.med-engineering.co.uk/products_pictures/IMG_5015.JPG


PIGEON
http://seanetters.files.wordpress.com/2009/02/jgolub924-57171.jpg


srs
Daveho1
26-07-2013, 08:18 PM
opp soz for not knowing...so where in gearbox is pidgion?
Rage King
26-07-2013, 08:21 PM
opp soz for not knowing...so where in gearbox is pidgion?

haha .. its inside the gearbox :D
Daveho1
26-07-2013, 08:40 PM
so open case an theres just pidgion? sounds like byp
Baby Face
26-07-2013, 09:01 PM
You must spread some Reputation around before giving it to Daveho1 again.

dayummm
tiksie
27-07-2013, 02:31 AM
If it's a ringing noise, it's the input shaft.

These pictures are from when I replaced my snapped clutch fork, but shows you what it is:

http://i.minus.com/ibr6UTtHT1eJZU.jpg

It's not detrimental to the car/box.. Just sounds annoying.
Daveho1
27-07-2013, 05:51 AM
not double clutchn like u should. now the mad scientest and i gotta replace the piston rings you fried