going k

[viinnh]

hey guys planning to go k24a3 into a teg, and was wondering could i use a k20a3 shifter box?? its a 5 speed shifter box but the k24a3 is a 6 speed..

is it possible to use ?

[stndrd]

No you cannot use. You will need either a dc5r or Hybrid Racing shifter box. Can supply Hybrid Racing shifter box and other swap related products

[viinnh]

alright thanks heaps. inboxed you !

also would you know instead of using a k20a2 engine loom for the k24a3. could i use a k20a3 engine loom and charge loom?

could i also use the k24a3 IM+TB or would i need a k20 one with hasport adaptor plate.

thanks !!

[u mad?]

you can use the stock mani and tb, check if its fly by wire though

[EG5]

you can use the stock mani and tb, check if its fly by wire though

k24a3 is running drive by wire
Just run stock manifold

[viinnh]

Will be getting RBC ones

[viinnh]

Hey guys if i was running a RBC manifold on a k24 motor..

What others things do i need on that RBC manifold ?

The adapter plate for k20a3 tb and all the sensors on the tb?

Are there any other manifolds + TB i can run thats cheaper?

[u mad?]

just get hybrid racing tb

[euRo_noob]

HR throttle body is $$! Unless he has the money.


Hey guys if i was running a RBC manifold on a k24 motor..

What others things do i need on that RBC manifold ?

The adapter plate for k20a3 tb and all the sensors on the tb?

Are there any other manifolds + TB i can run thats cheaper?

Are you just looking for something cheap? Cheapest would just be to run the stock stuff but wouldn't be worth it.
Why not RBC manifold + RBC adapter plate + S90 throttle body?