bbs rs replica 15 multi fit et15

[blu]

hi guys im planning to buy bbs rs replica if im going to 15x8 et 15 what problem will i get..? do i need to roll guards..? camber kits..? need help guys thanks

[Daveho1]

why so wide n8? not race car. talk to super-da9 hes the stance king and has og san in 15x15, not a popular size but max camber+ cashed up dollers = instant chicks

to put it in perspective im running 15x7 +33 and i had a slight scrape in the rear of my eg, however buddy had 15x8 on the eg and basicly you cant take your fat mates anywhere...but he looks pritty cool.

[blu]

why so wide n8? not race car. talk to super-da9 hes the stance king and has og san in 15x15, not a popular size but max camber+ cashed up dollers = instant chicks

to put it in perspective im running 15x7 +33 and i had a slight scrape in the rear of my eg, however buddy had 15x8 on the eg and basicly you cant take your fat mates anywhere...but he looks pritty cool.
which og san he has..? the old skool or meshish..? i tried a 15x8 + 20 and tyres fitted are 195/50(rear)195/45(front) on my old ej8 because the guards are rolled has a slight rubbing problem encountered due to not proper coilovers,, but i don't know with 15x8 +15.. ahaha offset difference man.. can you send me a link of da9..? so i can pm him man..? thanks

[Daveho1]

dem 195/5 are to small 4 8" son. buy dem tyres dat fit aiiight

[blu]

ahaha i want a stretch tyres man ehehe

[Daveho1]

im not providing information to you any longer.

[blu]

ahaha why man..? okay okay ill go for what you said.. i know its for my safety.. pls help me man

[Daveho1]

haha im just kidding buddy, honestly some stretch is fine, its just not to my taste personally (i run 205/50r15 on my enkeis) if thats you thing go for it, dont let dickheads like me tell you what to do :p

[blu]

ahaha.. i want to put 175 or 185 on a 8j ehehe

[mugen_ctr]

the question is why do u wanna run such low offset????

I dont mind the size, 15x8 is a good size to go, but at that offset, ur crazy lol

But the tyre size, EWWWWWWW.... sooo skinny... makes the stock tyre size look fat compared to those u mentioned Blu LOL.... Atleast go for the normal size 205/50r15, that way its a compromise of looks and performance

I like performance, not stance so i wont b no help man soz.....

[mocchi]

no stance
no halp

[ctx]

better wheel is the gramlights or if bbs use the deep dish, look nice on the ek9 honda

[blu]

the question is why do u wanna run such low offset????

I dont mind the size, 15x8 is a good size to go, but at that offset, ur crazy lol

But the tyre size, EWWWWWWW.... sooo skinny... makes the stock tyre size look fat compared to those u mentioned Blu LOL.... Atleast go for the normal size 205/50r15, that way its a compromise of looks and performance

I like performance, not stance so i wont b no help man soz.....

ahaha brother i was just asking for the offset if they fit cause they don't have higher offset.. anyway as you said i wont get those off set to low.. i was looking for 15x8 or 16x8 + 25 above.. if i cant find one i'll just go for axis og's man,, if i can find the mesh one i'll go for them..

[baethos]

lol what's up with ppl here not helping? anyway, OP I run bbs rs in 15x7 ET16 with 195/50 RE002 tyres. To be honest the tyres are pretty fat, there's no stretch. A slight stretch would be good. I think 195/50 on an 8J would be a good size. Anyway, I have my front and rear guards rolled. I'm also running -3 deg camber front and -3.5 deg camber rear. I don't rub at all, and I probably don't need that much camber too. Still have a finger gap between tyre and fender (from the side), but my coilovers are set to their 2nd softest damping.

Depends a lot on how low you go. I have my fender sitting on top of the tyres (so basically no wheel gap).

[blu]

any suggestion for a safe camber.. no rub issues i already got 15x8 +25..

[carayan]

any suggestion for a safe camber.. no rub issues i already got 15x8 +25..

2 degrees+, pick up some aftermarket camber arms.


have you considered scrubbing and all that?

[mattsrea]

sheit thats a low offset dude! if you dont want to run alot of camber, pull them guards out and get decent stretch tyres (maybe 195/45?) i wouldnt go any lower then 15x8 et 25. I dont want to put alot of effort in making wheels fit :)
but yeah have a look at this and get some ideas on what setup would suit you

SHARE YOUR STANCE - The guide to achieving that ideal setup..
http://honda-tech.com/showthread.php?t=2904182

[blu]

2 degrees+, pick up some aftermarket camber arms.


have you considered scrubbing and all that?

i got the rear camber kits do i still need the front one's? so i won't have a scrubbing and all that issue..?

[blu]

sheit thats a low offset dude! if you dont want to run alot of camber, pull them guards out and get decent stretch tyres (maybe 195/45?) i wouldnt go any lower then 15x8 et 25. I dont want to put alot of effort in making wheels fit :)
but yeah have a look at this and get some ideas on what setup would suit you

SHARE YOUR STANCE - The guide to achieving that ideal setup..
http://honda-tech.com/showthread.php?t=2904182

thanks mat.. i saw one has a 16x8 +25 he has a -2 camber setting.. maybe i'll go for that,,^_^