Standard dc2r front wheel stud length

[crobaa]

Hi guys, looking at buying some extended wheel studs for the front of my dc2r, the set I've found are arp and 2.85". But I have no idea on the length of the standard studs to compare with. Anybody know the specs? I only want to go about 10mm longer than standard

[Baby Face]

is that measurement of the thread+spline?

[crobaa]

I think it's total length, but I have no idea

[Baby Face]

well take your wheel off and measure the length from the tip of the thread to the rear of the plate.
ie:
http://www.karcepts.com/shop/img/p/53-268-thickbox.jpg

but unless you know how that one is measured wont be much help i dont think.

[Killa From Manila]

arp wheel studs are much longer, for eg. im running them with project kiks wheel nuts and they poke out the ends. are you trying to fit spacers or something?

[mnc]

Most of the aftermarket extended studs are all roughly the same length billy.

Worse comes to worse you will probably have to use open ended wheel nuts.

[crobaa]

Yes trying to fit spacers so my wheels will clear my calipers. What's people's thoughts on the maximum thickness spacer that can safely be run? Just a slip on, standard studs

[FoodTray]

Yes trying to fit spacers so my wheels will clear my calipers. What's people's thoughts on the maximum thickness spacer that can safely be run? Just a slip on, standard studs

5mm..

[crobaa]

Fingers crossed I won't need more than a 5mm spacer