PDA

View Full Version : P29 ecu question



rpm boy
24-09-2013, 09:19 PM
Hi guys, have done a bit of searching over the net but can't find a lot of specific Info
I have a p29 ecu from my auto eg6 and would like to know what type of ecu will be a straight plugin as it will be manual very soon, a lot of the net has info about changing the ecu internals to cater this but they are all talking about the zc configuration of the ecu and also hondata chip would be a lot less messy if its a simple swap over
Thanks
Rob

ECU-MAN
24-09-2013, 09:37 PM
when engine will you be running

if you still going to run the same D16A8 but just changing the car to MT then the same ECU can be used with a small mod. If you want to use this ECU with another engine D or B or H then your P29 will need to be converted to accept a socket and have VTEC support added

rpm boy
24-09-2013, 09:59 PM
It's the standard ecu for the auto eg6 so still running b16a, that's the problem no one has info on the p29 as a b series ecu....... Yet it's standard lol
My main thing is not wanting to screw around with the harness and hondata in the near future

ECU-MAN
24-09-2013, 10:15 PM
I can modify the P29 to run the B16A2 with MT for you

PM me for more details

rpm boy
26-09-2013, 08:32 PM
37820-p29-q50
That's the code on the side