PDA

View Full Version : How to set "hot tyre pressures" in Neova AD08s and ADVAN race tyres



matespace
27-09-2013, 11:05 PM
http://i762.photobucket.com/albums/xx270/go2spacebucket/ev-3.jpg (http://www.yokohama.com.au/News-and-Blog/2013/September/How-to-set-hot-tyre-pressures-in-race-tyres.aspx)

Ever wondered what tyre pressures to use at the race track? You're not alone.

One of the most common questions at amateur track days is "what tyre pressures should I run?" Most drivers don't answer this question confidently because it's a bit of a black art.

http://i762.photobucket.com/albums/xx270/go2spacebucket/ev1-3.jpg (http://www.yokohama.com.au/News-and-Blog/2013/September/How-to-set-hot-tyre-pressures-in-race-tyres.aspx)

If the driver of this Improved Production Racing Association Holden Commodore SS VN Group A wandered up to me and asked "what tyre pressures should I be running" I'd suggest that the manufacturer's recommended pressure for the ADVAN A050 (http://www.yokohama.com.au/en/Tyres/ADVAN-A050-R-Spec.aspx) tyre (not the car) is around 30- 32 psi hot. But it's a big, heavy and powerful car....

http://i762.photobucket.com/albums/xx270/go2spacebucket/ev2-3.jpg (http://www.yokohama.com.au/News-and-Blog/2013/September/How-to-set-hot-tyre-pressures-in-race-tyres.aspx)

If the driver of this 1960s mini (I'm guessing the age) came up and asked "what tyre pressures should I use?" I'd say the manufacturer's recommended pressure for the old ADVAN A032R tyre (not the car) is around 32 -34 psi hot. But it's a small, light and not very powerful car...

If the mini was using ADVAN A050 (http://"http://www.yokohama.com.au/en/Tyres/ADVAN-A050-R-Spec.aspx) tyres the recommended pressure would be the same as the Group A Commodore, 30 - 32 psi hot. Don't believe it? Neither did I at first. They're completely different cars. This was first explained to me by the Yokohama motorsport tyre fitter at a Yokohama V8 racing ute round in Darwin. It took at least four beers for this sink in.

http://i762.photobucket.com/albums/xx270/go2spacebucket/ev3-1.jpg (http://www.yokohama.com.au/News-and-Blog/2013/September/How-to-set-hot-tyre-pressures-in-race-tyres.aspx)

After a decade of working for Yokohama and racing my own VW beetle and Subaru WRX I decided to pass on some knowledge. In the last 12 months I've attended Circuit Club (http://"http://circuitclub.com.au/page/home-page) and ADVAN track days armed with a pressure gauge and pyrometer to help participants get the most out of the Yokohama tyres.

View the full article on the Official Yokohama Australia website. (http://clixtrac.com/goto/?138205)