PDA

View Full Version : CL9 electric seat issue



fa_sumo
20-11-2013, 05:24 PM
So my drivers side electric seat has a bit of an issue. The seats reclines fine and tilts up and down fine however when it comes to sliding forward and back there seems to be an issue. When I go to slide it forward or back it seems to get stuck and then the motor kind of whines down and then stops. The left side of the seat seems to pivot/slide a little bit but the right side seems to be sticking.

I'm not sure if anyone has had this issue before but I had a quick look under the seat to see if anything was stuck in the rails and it seems clear.

Anyone have any idea of whats happened or how it can be resolved?

d-Z1R3
23-11-2013, 10:22 PM
take the seat off its rails and see if it operates, check all rails, cogs an gears.

aaronng
24-11-2013, 12:51 PM
Yeah, take the seat out, inspect the right rail. Either the rail has jammed or one of your 5 cent coins which fell out from your pocket managed to get itself in there.