PDA

View Full Version : Under-dash fuse box connectors -- I give up



rling
24-11-2013, 06:37 PM
OK I give up

Where, in the Jazz/Fit Shop Manual on CD, is the diagram of the under-dash fuse box with all the connectors labelled? (not the fuses...)

Would like to splice something into the 12V permanent supply for the radio memory, but cant be bothered pulling the centre console out (along wth glovebox, ventilation switches, ventilation mechanical linkages, etc etc)... so knowing which connector is the radio harness would make my day

Thx

Rage King
22-03-2014, 09:11 PM
Just use the 12v direct supply from the IGN Batt source. Just remove the under steering column cover and trace the thick wires leading to the IGN barrel.

rling
26-03-2014, 07:27 AM
I found a better idea, a fuse tap...
http://i.imgur.com/hOdAw0k.jpg
$8 delivered from ebay.
http://www.ebay.com.au/itm/2x-Blade-Fuse-Tap-Holder-Add-A-Circuit-Line-ATM-APM-Car-Truck-with15A-Mini-Fuse-/160993233161
The fuse holder on the top left of my fusebox was empty, (but live) so I plugged the fuse tap in there.