Tranny support /stiffner

[monda2]

Hi all

How important are the front and rear tranny stiffners/ supports? As you can see Iam trying to fit the scattershield and the rear stiffner is in the way do can't be used if I use the scattershield , the manufacturer has suggested they leave the stiffner off there racecars as it doesn't do a lot , what do you think?

[bennjamin]

i cant prove this right or wrong - but I have run engine without this brace before without issue on and off the track.

[monda2]

Ok good to know, there shouldn't be to many dramas then. cheers

[Adrian @ SAS]

Or you could remove the thickness of the scatter shield support from the brace & use both with original bolts

[mooshie]

^agreed, doesn't look to hard to shave it down a bit