Charlies eg civic b18c2 high comp build

[charlie94]

hey guys whats up this is pretty much my first build thread on oz Honda so go easy on me lol anyways lets get started.

Well im planning to build my civic hatch its a eg5 1991
Mods that have been done:

Body:
-Bc racing coilovers type r rear lower control are eyelet type
-Vtir integra brakes
-Sound deadening removed interior has been resprayed
-Bb4 jap spec master cylinder and booster
-Integra vtir rear sway bar and front swaybar
-Full hard race bushes replaced
-hasport mounts
-hondata s300 v2

Engine
-Ordered Rz crew garage stage 2 cams , double valve springs, titanium retainers and flat faced valves
-Bloxs cam gears ,gates racing timing belt kit
-Mahle PowerPak 4032 Forged Pistons 12:5.1
-Manley H-Beam Rods,arp rod bolts
-Acl race bearing
-Arp headstuds
-Crank micro polished, block bored & honed out to 81.5, head and block decked
-B16b type r gearbox
-5 angle valve job
-port & polish
-Maybe blox manifold
-5zigen exhaust extractors 2.5 stainless steel exhaust

Im just waiting for most of these parts to come in once they come in mainly engine wise but im going for 12:5.1 compression and once its all complete get it tuned by toys garage

The only thing im stuck on now is im not sure either if i should get arp main stud bolts or not

[Lukezen27]

Hello Charlies

Reason for the build?

No budget by the looks of it?

[IEVAQ8]

looking forward to this and a video....

my opinion, get STUDS

[charlie94]

hey guys the main reason is I've always wanted to build my car lol im a 3 yr apprentice mechanic so im on a budget but Ive been getting my parts slowly here and there taking my time lol not in a rush at the moment im just cut cause i got to wait for my parts to come in lol and id defiantly get a vid when its up and running :)

[charlie94]

thanks mate yeah im going to order them

[charlie94]

okay here is a update

Installed the coil overs still need to adjust the height
resprayed my engine bay
resprayed my booster and cross member in heat proof paint
installed the integra front disks lower control arms sway bars and removed the heater box
installed my brake lines and prelude master cylinder and booster
resprayed my doors and dashboard vinyl spray
also my blox cam gears finally came in lol :D

[charlie94]

Well the bottom end has come in now all im going to do is send them off to a engine machinist to bore out the cylinders to match the pistons and get the block hot bathed and cleaned heres what came in ...

http://i981.photobucket.com/albums/ae293/move_out1/20000102_051454_zps6b4a83b5.jpg (http://s981.photobucket.com/user/move_out1/media/20000102_051454_zps6b4a83b5.jpg.html)

http://i981.photobucket.com/albums/ae293/move_out1/20000102_051527_zps34d18ce4.jpg (http://s981.photobucket.com/user/move_out1/media/20000102_051527_zps34d18ce4.jpg.html)

http://i981.photobucket.com/albums/ae293/move_out1/20000102_051546_zpsf92c7523.jpg (http://s981.photobucket.com/user/move_out1/media/20000102_051546_zpsf92c7523.jpg.html)

http://i981.photobucket.com/albums/ae293/move_out1/20000102_051602_zps5c27964c.jpg (http://s981.photobucket.com/user/move_out1/media/20000102_051602_zps5c27964c.jpg.html)

[dougie_504]

I like! Will be watching for progress!

Love the B. Kudos.

[charlie94]

Thanks mate well i got a pretty big update :)

well i finally bought my gearbox its a b16a with a 1.5 way LSD Ive resprayed the box now i just got to figure out what clutch to use

http://i981.photobucket.com/albums/ae293/move_out1/IMAG0892_zps9567aae1.jpg (http://s981.photobucket.com/user/move_out1/media/IMAG0892_zps9567aae1.jpg.html)


http://i981.photobucket.com/albums/ae293/move_out1/IMAG0888_zpscecbdc9c.jpg (http://s981.photobucket.com/user/move_out1/media/IMAG0888_zpscecbdc9c.jpg.html)

ARP main studs have arrived

http://i981.photobucket.com/albums/ae293/move_out1/IMAG0893_zps914ef6c4.jpg (http://s981.photobucket.com/user/move_out1/media/IMAG0893_zps914ef6c4.jpg.html)

My cam package finally arrived it came with the titanium retainers,double valve springs,flat faced valves and stage 2 cams

http://i981.photobucket.com/albums/ae293/move_out1/IMAG0903_zps94789eca.jpg (http://s981.photobucket.com/user/move_out1/media/IMAG0903_zps94789eca.jpg.html)

http://i981.photobucket.com/albums/ae293/move_out1/IMAG0902_zpsd9101575.jpg (http://s981.photobucket.com/user/move_out1/media/IMAG0902_zpsd9101575.jpg.html)

http://i981.photobucket.com/albums/ae293/move_out1/IMAG0904_zps63738786.jpg (http://s981.photobucket.com/user/move_out1/media/IMAG0904_zps63738786.jpg.html)

http://i981.photobucket.com/albums/ae293/move_out1/IMAG0905_zpsfd49aeae.jpg (http://s981.photobucket.com/user/move_out1/media/IMAG0905_zpsfd49aeae.jpg.html)

http://i981.photobucket.com/albums/ae293/move_out1/IMAG0896_zps2c0acaa6.jpg (http://s981.photobucket.com/user/move_out1/media/IMAG0896_zps2c0acaa6.jpg.html)

http://i981.photobucket.com/albums/ae293/move_out1/IMAG0894_zps250d7cfb.jpg (http://s981.photobucket.com/user/move_out1/media/IMAG0894_zps250d7cfb.jpg.html)

enjoy :)

[stndrd]

Looking good on the build mate. If you are wanting a good quality clutch but keep the budget in check, I can supply a Competition Clutch kit for you with lightened flywheel

[carayan]

wait a minute, is that jez's old box? the s21?

[charlie94]

lol yeah thats the box

[charlie94]

hey thanks mate but ive already bought a clutch thanks though :)