PDA

View Full Version : 99 Accord - Model Codes - Suspension


Ten Four
20-01-2014, 03:09 PM
What is the model code for a 99 accord 4cyl? I just got one and the shocks need replacing.
What other accord models fit or otherwise? (Ie JDM / USDM etc) Also after model codes for these alternate models so I can search that way.

Cheers
Jasemas
20-01-2014, 11:06 PM
Your chassis code is cg6. 6th gen US Accord
Japanese got the CF1, which became our euro
Pretty sure the difference between the v6 and 4cyl is the front shocks due to the weight of the v6 compared to the 4 cyl
Hope that hepls

By the way
What shocks need relacing? front or rear?
Ten Four
21-01-2014, 02:39 AM
I need front mainly but rear too if price is right or I can find a good second hand set.

Was searching yahoo JP but nothing comes up searching the above codes, hence asking what JDM model codes are that fit my aussie one.
Jasemas
21-01-2014, 11:29 AM
^ no jdm will code fit your accord....
Your cg6 as i said before came from America/built there
So you'll need to look at american sites...
Ten Four
21-01-2014, 12:09 PM
Ok thanks.
I thought like the same era Euro R from Japan / UK would fit, obv not. Thanks for clearing that up.
Jasemas
21-01-2014, 06:56 PM
Nop
No way, totally different
USDM accords are ugly, overweight, handle and look like a boat compared to JDM spcs
Ten Four
21-01-2014, 07:20 PM
Ok
One last thing man, can you tell me which it is? KYB have different part numbers.

12/1997 01/1999 CG 1 / 5, 2.3L & 3.0L V6 Sedan (Front Strut Spring Seat Dia: 102mm, Rear Spring Seat Dia: 140mm)
02/1999 08/2003 CK 2, 2.3L, VTi-L Sedan (Front Strut Spring Seat Dia: 88mm, Rear Spring Seat Dia: 129mm)


http://www.redbook.com.au/cars/research/used/details/1999-honda-accord--71349?R=71349&Silo=spec&Vertical=car&Ridx=1&eapi=2

^ Is my car basically. Going off the vin, its CK2?
Jasemas
21-01-2014, 07:42 PM
Well what's your VIN number?
Ten Four
21-01-2014, 08:03 PM
Built Feb/99.
MHHCK2650XPXXXXXX

CK2 it is.
Jasemas
21-01-2014, 10:01 PM
There you go
Ten Four
21-01-2014, 10:46 PM
Still reckon its weird how they don't share components across platforms :\
Oh well.
Jasemas
22-01-2014, 10:51 AM
The gth gen accord
Was divided into two platforms a first for the accord
CF - jdm model
the cf would eventually become our euro (cl9)

AND

CG - USDM/AUS/NZ model would eventually be our (cm) our 7th gen accord

So you see the split between the euro and normal accord happening from the 6th gen
Some parts are interchangable but their chassis are pretty much different