PDA

View Full Version : K24 Accord Euro Vtec problem?



dphamton
13-02-2014, 03:45 PM
Hi,

So here's my problem. I just discovered that every time I rev to and over 6000 rpm and then go back down to idle it idles funny. From there on the problem stays like that and when start it from a cold state and drive it wants to stall. To get rid of the problem temporarily I have to rev it lightly on and off for about 10 - 15mins to let it run fine again. I've read forum where they say it could be a vtec solenoid but still not sure on that; others say it might be tappets?

Not sure and need help! No fun without vtec

Short Story
-Honda Accord Euro K24 engine
-Vtec problem after 6k rpm

RenzokukenJ
13-02-2014, 05:31 PM
Maybe iacv is groce and needs clean

dphamton
13-02-2014, 10:24 PM
Cheers mate, I'll try that out and repost how it goes.

mocchi
19-02-2014, 05:46 PM
any cel? did u do any mods?

curtis265
19-02-2014, 11:14 PM
sounds almsot as if ur vtec is stuck on - when u say rev to 6000 is that driving in hear then letting off?

Jasemas
22-02-2014, 12:03 PM
Maybe your VTC is rooted?