tyre scrubbing

[jsambo]

hi guys just asking i have king springs in my ek 4dr with stock rims but it is scrubing on the inner wheel arch seam next to the spring what have ppl done to stop this as im thinking of getting out the hammer and bashing it flat

[integraR]

Roll guards

[RenzokukenJ]

I let mine scrub itself until it doesn't scrub anymore

[jsambo]

^^^^^ hahaha .... it dosnt scrup on the guards its more the inside wheel arch on the seam at the front rear only scrubs when reversing down a curb

[RenzokukenJ]

I'm not joking, mine only does it when I turn full lock on a hill, the top of the tyre hits the fender lip because tyre too thick (like my 2in penor)

I wouldn't worry about it, just reverse out slow, take your time and no scrub

I dun wan no scrub

Scrub is a gay that can't get no lovin fram meh

[integraR]

http://www.youtube.com/watch?v=FrLequ6dUdM

[jsambo]

Yer I try going down the curb slow and over bumps slow and side ways but it still scrapes just wanting 2 find out if I need stiffer shocks and if any one has cut or bashed the inner arch seam flat

[RenzokukenJ]

That's more your choice on if you want to be driving a harder ride or having the risk of damaging your fenders

I just left mine, was planning on making mine flat to solve my issue but yh nh cbf

[jsambo]

just gets anoying as its not really that low just the suspention shocks are shit may just get coilovers and bash the shit out of the inner arch

[Type FN]

get coilovers 20kg front spring and 18kg rear springs will sort out your scrubbing issue, good dampers at that spring rate is good for street to believe or not, from experience. =P

[lilthug]

did you replace your shocks after putting in the king springs?

you could also try running a smaller tyre size/profile

[jsambo]

just has standed shocks with king springs ... yer wanting 2 get some coilovers and a camber kit 2 sort out my problem befor i get new rims