GucciSir
09-05-2014, 10:17 AM
Hey guys!
Currently looking at swapping out my current custom 3inch exhaust on my dc5R which was done by the previous owner. The reason for this is that its very droony, loud and it hangs far to low. I recently had it up on the hoist and the mid pipe has taked quite a beating!
Current engine mods:
InJen Intake
Toda Headers
3in custom exhaust
K-Pro Ecu and tune
TEIN HA coilovers
Excedy Heavy Duty Clutch
Lightend Flywheel
EP3 Sway Bar
Hard Race Engine Mounts
So with the current setup i definitely want to stay in the 3inch range but i don't want another custom exhaust.
I recently saw that K-Tuned have a 3inch oval exhaust. Link: http://www.jdmyard.com/index.php?rou...product_id=924
Feedback on this system seems to be very good from looking on the forums and sound tests on YouTube.
I just need to know if these will or can be modified to be connected to my TODA headers? It says it bolts on straight to the OEM header.
In addition, if i was to fit this exhaust, would i need to get a retune on the K-pro??
Appreciate any help!
Currently looking at swapping out my current custom 3inch exhaust on my dc5R which was done by the previous owner. The reason for this is that its very droony, loud and it hangs far to low. I recently had it up on the hoist and the mid pipe has taked quite a beating!
Current engine mods:
InJen Intake
Toda Headers
3in custom exhaust
K-Pro Ecu and tune
TEIN HA coilovers
Excedy Heavy Duty Clutch
Lightend Flywheel
EP3 Sway Bar
Hard Race Engine Mounts
So with the current setup i definitely want to stay in the 3inch range but i don't want another custom exhaust.
I recently saw that K-Tuned have a 3inch oval exhaust. Link: http://www.jdmyard.com/index.php?rou...product_id=924
Feedback on this system seems to be very good from looking on the forums and sound tests on YouTube.
I just need to know if these will or can be modified to be connected to my TODA headers? It says it bolts on straight to the OEM header.
In addition, if i was to fit this exhaust, would i need to get a retune on the K-pro??
Appreciate any help!