Please Help Me Pick A Tyre Size!

[Jumanji]

Hey guys, recently purchased a set of rota Grid rims, the dimensions of the rims were 16x7 +40mm I got them out yesterday and Measured and they came out to be 16x7.9 inches?
Now for my tyre choice I cannot seem to decide (My car is a DC2 Integra) what size I like a very small amount of stretch but not too much right now I am tossing up between 195/45/16 and 205/45/16 Im leaning more toward the 195 but Im looking for advice? If anyone has photos of this setup or Rims of that Size Id really appreciate it!
Thanks :)

[Hondarally]

First of all, how did you measure them? The width is from the inside of the bead mounting faces See the pic below:

http://www.kawiforums.com/attachments/2007-2008-zx-6r/997d1198205531-question-how-measure-wheel-width-rim.jpg

Secondly, you can run 195 or 205 OK on a 7"rim. 7" is probably towards the upper end of a 195 tyre, but most manufacturers will be OK with this. 205 tyres are generally made for 5.5" to 7.5" rims so again this should be fine.

[curtis265]

YOu can visualise it here a bit better.

http://www.tyrestretch.com/7.0_195_45_R16/
http://www.tyrestretch.com/7.0_205_45_R16/

[Jumanji]

Went 195 and Im suuupper happy with the fitment!