DC2R Charcoal canister question

[dorikin]

Hi everyone can someone tell me where the smaller purge hose goes to on a stock audm DC2R (from the canister)

27034

The top one fitting goes to the evap purge control solenoid valve but not sure about the smaller one below it. It doesn't go to the throttle body like other Hondas because DC2R doesn't have the fitting on the tb

[mocchi]

i think its capped with rubber nipple

[dorikin]

Yeah I thought so, I vaguely remembered a rubber cap but no idea where it's gone now. thanks mocchi

[EK1 Civic]

http://img.tapatalk.com/d/14/06/08/jeduvyga.jpg

Heres a pic of mine, connects to a hard line on that silver bracket if you follow the rubber piping in my pic

[EK1 Civic]

http://img.tapatalk.com/d/14/06/08/yvy9y2a2.jpg

HL stands for hard line

[dorikin]

which port on the charcoal canister are you looking at? the one that goes to the hardline is from the top center of the charcoal canister, that line run ones to the fuel tank

im actually referring to the the other port on the canister. In my pic, it's the lower nipple with no hose on it

[EK1 Civic]

Oh shit didn't realise there was three ports, only noticed the main one and the one above the lower one. One sec ill go check for ya

[EK1 Civic]

Just a rubber cap over the bottom one mate

[dorikin]

Thanks for the confirmation mate

[DC2-PWR]

Good thread. Been wondering where that goes too! Finally can rest lmao.