Ef h22 handling

[unknxn]

So I was thinking of putting a h22 in an ef, was just curious how the handling would be with the swap?

[dove grey 64]

Heavier motor, more understeer.
If the h series sits any further then d/b series then it'll understeer even more.
From looking at pics a k series would be ideal as the engine sits closer to the firewall, you want the motor to be as far in as possible for it to be an improvement
http://www.hybrid-racing.com/wp-content/uploads/ScarCRX10.jpg
K swap

[Snoop_gee]

seeing as you mentioned handling.
I would of thought the perfect balance for the ED/EF chassis is b18 or b20frankie (b16a head b20) i would of thought

A h22a CRX has been done in Australia before.



https://scontent-b-sea.xx.fbcdn.net/hphotos-xpf1/t1.0-9/10171006_764753200212683_4472823193789646221_n.jpg

https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xfp1/t31.0-8/901488_764753230212680_1412294609203736208_o.jpg

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xpa1/t1.0-9/10250285_764753353546001_1443109207432483600_n.jpg

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xpa1/t1.0-9/10314674_764753390212664_3439676759464224393_n.jpg

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xfp1/t1.0-9/10271521_764753143546022_884574693485994268_n.jpg

Sourced elsewhere

You can get an H22 in your car for less work and less money. Go H2D with the Bisimoto kit...there aren't many out there and it's a bangin combo. I'm doing on in an EF hatch. The kit is awesome, and you can't beat the power for the money.

With K you have an expensive mount kit, an expensive swap to begin with, fuel system mods, a custom header, all kinds of stuff. With the H it's a more compatible swap, plus an H22 longblock is cheap as balls with the same peak hp as a K.

H2D if your on more of a budget...Kseries if your a baller...that's how I see it. Both can be fast as balls.