17x9+38 on s2k rear

[Baby Face]

looking at getting another set of wheels want something wider than 8" allround

currently have 17x8+45 all round; rear is not poking out at -2 camber
front is sitting at either -1 or -1.5 and they are basically flat with the fender.

new set im looking at is, 17x8+35 F and 17x9+38 R
the fronts i think can fit in with a lil more camber. front tyre size is a 215.
but the backs im not so sure, will it fit at stock height or am I gonna need to roll my guards/run more camber.
dont plan on going lower yet, and if i do it will only be maybe an inch at most.

anyone with any knowledge to share?

[boodgy]

I'm running those exact specs on rears. 245/40 tire with -2 camber. Pretty easy fit if you don't plan on lowering

[curtis265]

Hi Baby Face

i have 17x9+63... i know right

anyway these don't fit too badly at stock height

http://i128.photobucket.com/albums/p171/roflcurtis/33a66d45-39ff-42d6-b871-587133ecc495_zps5a6b5eba.jpg

[RenzokukenJ]

Pls buy spoon rims bbf

[EKVTIR-T]

which ROTA weels are you interesting to get?

[RenzokukenJ]

which ROTA weels are you interesting to get?
Teknik

[Jasemas]

I heard tri spoke
DUN DUN DUN

[Flippit]

I'm running 17x9.5 +40 on rear with a 255/40 tyre @ 3 degree camber and pretty low.
No problems at all besides on maybe a really big ditch in road she will scrape at top of the wheel arch but nothing major!

[Baby Face]

ended up picking up a set of spoon cr93 in 17x8.5+45 all round, they are basically flush at stock height with -1 F camber and -2 R camber