Integra-GSi
24-08-2014, 04:24 PM
I had to have the centre bore machined out to 56mm, and it clears the brakes on my DC4 by a bees dick, but I did my Integra a favour by fitting Toyota wheels :p I'm just trying to decide now what I want to do with the centre caps. Seeing as the say TOMS tuned for Toyota on them and they're cracked as anything I'm not sure I want to put them on just yet.
But to come off a boat from Japan looking like complete and utter shit, after getting my brother to paint them white, they've come up pretty good and with a little time and effort it wasn't that big of a deal to have them fitted. Next step is coilovers I guess, but I haven't fully researched going down that path. I should have perhaps researched this one a little better, you'd think generally that aftermarket wheels would fit anything provided the stud pattern was right, but you learn things as you go, blazin the trails and all that.
https://scontent-b-sea.xx.fbcdn.net/hphotos-xpf1/t1.0-9/10563097_10154514148985603_2260886090077802121_n.j pg
But to come off a boat from Japan looking like complete and utter shit, after getting my brother to paint them white, they've come up pretty good and with a little time and effort it wasn't that big of a deal to have them fitted. Next step is coilovers I guess, but I haven't fully researched going down that path. I should have perhaps researched this one a little better, you'd think generally that aftermarket wheels would fit anything provided the stud pattern was right, but you learn things as you go, blazin the trails and all that.
https://scontent-b-sea.xx.fbcdn.net/hphotos-xpf1/t1.0-9/10563097_10154514148985603_2260886090077802121_n.j pg