EG brake master upgrade. Need help**

[Dawsey]

Hi guys, I need to upgrade my EG Master, it is currently running a 13/16 which is around 20MM I think (can someone confirm this) and I need to run around a 25mm master to run the 200sx front end we have fitted to the car. Now I have read that the Integra type r master is close to this, but needs a few mods to fit. Can anyone give me another option for this, something as close to 25mm is all I need. I am custom making the hardlines to suit so all it needs to do is bolt in I can make the rest.

oh and I need to find one today... Thanks

[mocchi]

wat u mean need few mods to fit? its bolt on to eg firewall. unless you changed something like pedals/firewall?

[Dawsey]

By Modify i mean, they are pumping 200sx brakes... so the pickup points are all changing.. i just need a 25mm brake master that has the same bolting position as the standard EG civic

[Dawsey]

would a EP3 civic type R booster and master fit my firewall?

[mocchi]

By Modify i mean, they are pumping 200sx brakes... so the pickup points are all changing.. i just need a 25mm brake master that has the same bolting position as the standard EG civic

the dc2r bmc+booster bolts on no mod needed.
then you just make your own brake lines right

im pretty sure ep3/dc5 fit as well.

[carayan]

itr or vtir 1 inch will fit fine, just get the matching brake booster, and remake your lines as required.

[PJT]

How do you remake the lines, bar replacing them all? I have a Dc2 master cylinder/booster and need to connact it to eg lines also. But a bit thinner than the dc2 booster accepts...

[hmetro24]

I would get a brake booster delete kit. as they said dc2r would fit. Could you post some information about your brake setup ??

[rc_]

I would get a brake booster delete kit. as they said dc2r would fit. Could you post some information about your brake setup ??

Why delete the booster?

Op doesn't say anything about removing it, just want one that will fit EG with 1" master. Go with what the guys said above and use a vtir/dc2r 1" version.

[hmetro24]

Why delete the booster?

Op doesn't say anything about removing it, just want one that will fit EG with 1" master. Go with what the guys said above and use a vtir/dc2r 1" version.

I said, I would get( that's my opinion). I did not say go change it. Do not explain everything the way you want...

[shepparton]

try prelude or honda accord brake master

[Dawsey]

Thanks guys, I have found an integra (abs) 1 inch cylinder, but have to now get the booster into the firewall.
to be honest the brakes are not as bad as we thought. the EG booster runs the Nissan brakes well enough for now.
https://www.youtube.com/watch?v=VISyW2wbSJ4