View Full Version : Tried resetting light, didn't work, possible fix?
DRIFTMONKIEZ
18-12-2014, 03:23 PM
Hey guys, I took out my steering rack and changed the boots/sleeves and put it back in, but now I have the SRS light coming up. I tried resetting it, but its still coming up. Everything on the rack is connected, the SRS fuse isn't blown either. The car does need a major wheel alignment since the change, if that helps. Can anyone point me in the right direction? Cheers guys.
RenzokukenJ
18-12-2014, 04:23 PM
What exactly did you try
DRIFTMONKIEZ
18-12-2014, 04:29 PM
I pulled out the steering rack, had another rack 2nd hand but it had the wrong/swapped inlet and outlet threads, my inlet size was 14 and outlet was 17. I put in the 2nd hand rack in, didn't realise they were switch then the SRS light came up.
RenzokukenJ
18-12-2014, 04:50 PM
Did you try battery trick?
DRIFTMONKIEZ
18-12-2014, 09:15 PM
No, what is it?
RenzokukenJ
18-12-2014, 10:47 PM
Disconnect negative for 30 secs and put back on, then turn car on and see if light still there
That resets the error
DRIFTMONKIEZ
19-12-2014, 07:10 AM
Doesn't change a thing. :/
RenzokukenJ
19-12-2014, 09:51 AM
http://m.youtube.com/watch?v=54QxIwpx0QY
ECU-MAN
19-12-2014, 12:51 PM
I suspect you have damaged the cable reel.
when the rack was disconnected where you playing with the steering wheel ? rotating it from side to side ?
You cannot erase codes from the SRS unit by disconnecting the battery or SRS ECU, you must use the MES connector.
DRIFTMONKIEZ
19-12-2014, 12:56 PM
Well, when I was putting it back together, I did bump into the steering wheel, which yes, caused it to turn. How could I fix this, would I have to pull out the whole steering column?
RenzokukenJ
19-12-2014, 01:40 PM
On my prelude, I've had no issues resetting the light by disconnecting the battery..
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.