Tried resetting light, didn't work, possible fix?

[DRIFTMONKIEZ]

Hey guys, I took out my steering rack and changed the boots/sleeves and put it back in, but now I have the SRS light coming up. I tried resetting it, but its still coming up. Everything on the rack is connected, the SRS fuse isn't blown either. The car does need a major wheel alignment since the change, if that helps. Can anyone point me in the right direction? Cheers guys.

[RenzokukenJ]

What exactly did you try

[DRIFTMONKIEZ]

I pulled out the steering rack, had another rack 2nd hand but it had the wrong/swapped inlet and outlet threads, my inlet size was 14 and outlet was 17. I put in the 2nd hand rack in, didn't realise they were switch then the SRS light came up.

[RenzokukenJ]

Did you try battery trick?

[DRIFTMONKIEZ]

No, what is it?

[RenzokukenJ]

Disconnect negative for 30 secs and put back on, then turn car on and see if light still there

That resets the error

[DRIFTMONKIEZ]

Doesn't change a thing. :/

[RenzokukenJ]

http://m.youtube.com/watch?v=54QxIwpx0QY

[ECU-MAN]

I suspect you have damaged the cable reel.


when the rack was disconnected where you playing with the steering wheel ? rotating it from side to side ?


You cannot erase codes from the SRS unit by disconnecting the battery or SRS ECU, you must use the MES connector.

[DRIFTMONKIEZ]

Well, when I was putting it back together, I did bump into the steering wheel, which yes, caused it to turn. How could I fix this, would I have to pull out the whole steering column?

[RenzokukenJ]

On my prelude, I've had no issues resetting the light by disconnecting the battery..