Lower Control Arm differences (Left Hand Drive vs Right Hand Drive)

[Fredoops]

As stated in the title

I wonder if there are any differences between Left hand drive Lower control arms?

Been looking at replacing all the bushings on the front control arms, however the whole arm is on sale on Amazon which will likely workout cheaper (they are 1/4th the the cost locally). But im not sure if there would be any differences between left hand and right hand drive.

Any ideas?

EDIT:

this is the Part page for the EUDM (and pretty much AUDM) Right hand drive:
http://www.lingshondaparts.com/honda_car_parts_selection.php?block_01=17SEA01&block_02=B__2710&block_03=2853

This is the USDM left hand drive part page:
http://www.oemacuraparts.com/auto-parts/2005/acura/tsx-sedan/tsx-trim/5-speed-automatic-engine/chassis-cat/front-stabilizer-front-lower-arm-scat

[MIKO_OL]

Bushing should be the same. Shouldn't be any different. Check out locally at your local honda dealer and they'd have some with good quality. If not you could try JDMYARD in SYD and get them delivered. At least this way there is warranty. Make sure you find what you awnt with your bushings. Polyurethane, OEM, Solid etc.

[Fredoops]

Nah I they do turned out to be the same, as in the whole control arm

Didn't end up doing the whole arm replacement, ended up getting my own bushings and poly filled them