Do dc5r calipers fit on a dc2r?

[mikeyjr]

Has anybody ever put dc5r calipers on a dc2r?
Is it even possible?

[Jasemas]

Possible with time and money
But why would you want to upgrade the dc2r calipers. Unless you're tracking alot/hill runs etc.
The 17cl15vn calipers are fine.
They are also used on the v6 accord and 1st gen odyssey (which weighs almost 1500kgs)
If it can pull up a 7 seater minivan
It'll easily pull up a 1200kgs dc2r

[mikeyjr]

Hey jasemas,
So If I get a caliper with the carrier from a v6 accord it will be a straight fit on a dc2r?

[Jasemas]

I don't understand your question
The dc2r, cg v6 accord and Odyssey all share the same caliper & pads
Only difference is the mounting brackets - t23 or t25 - thickness of rotor

[mikeyjr]

Which cars have the same mounting brackets as the dc2r?

[Jasemas]

Probably just the dc2r
Not too sure about rotor thickness
The caliper assembly i took had t25 brackets on them

Do you have a dc2/dc2r?

[Jasemas]

Unless you're talking about the legit JDM Brembos

http://www.ozhonda.com/forum/showthread.php?100482-will-dc5-R-brake-fit-in-a-dc2R-eg&

http://honda-tech.com/acura-integra-type-r-8/dc5-brembo-dc2-2734980/

Then if you're baller you could go NSX calipers?

[mikeyjr]

I have a dc2r and am looking for a dc2r right hand side mounting bracket :/

[mikeyjr]

Then I thought If this conversion was possible, but too hard :/