can you change stud pattern?

[LaBomba]

hi, I want to know if I can change stud pattern size or the wheel hubs to different size to fit certain rims??

the current pattern on my integra is 4 stud 4x100. ..
can I change this? and what needs to be done?

[Vvvtec]

Get 5 stud setup from a dc2r/ek9

[cbauto]

can get 5x120 from bmw

[Vvvtec]

Alternatively take out hub, press out all the old studs and redrill to new pattern

Works all the time

[cbauto]

Alternatively take out hub, press out all the old studs and redrill to new pattern

Works all the time
pressing out would take too long. just cut it with a blow torch and weld new hub on.

[Vvvtec]

pressing out would take too long. just cut it with a blow torch and weld new hub on.

That's dodgy. Gotta do it properly

[cbauto]

That's dodgy. Gotta do it properly
depends who does it.

[u mad?]

cut off old studs, sikaflex new studs on in whatever pattern that pleases you internally

[u mad?]

Nah seriously if you want to do it cheap just buy a hub adapter

[RenzokukenJ]

make sure you get 5x114 for best rim choice

[cbauto]

make sure you get 5x114 for best rim choice
5x100 better rims

[RenzokukenJ]

5x100 better rims

sorry my mistake

[Integra-GSi]

Will need hubs from EK Civic or DC2R Integra... Go 5x114.3 you will be able to fit any modern Japanese rim with the right offset. Otherwise 4x100 is the same as front wheel drive Toyota, or European cars like old style VW Golf and some other things, but centrebore is all different. I redrilled Toyota wheels in the end to make them fit on 4x100, but ended up with I guess 1 of a kind wheels as a result.

[cbauto]

Bump.

[Renaissance_x]

Sad that this guy got such bad troll advice.

[Super-DA9]

Sad that this guy got such bad troll advice.

This was literally the first comment, which was exactly what he needed to do:


Get 5 stud setup from a dc2r/ek9

[RenzokukenJ]

Sad that this guy got such bad troll advice.
Stop trolling rennie, it's not a good look on you