newbie crashed his cxi and loking for part

[Covet]

Hi guys, I am a newbie

I recently crash to barrier. the bonnet folded, bumper cracked, and also the "metal" with the bonnet catch was banned,which pushed the coolant box touching the air cleaner.

It is really bad? what parts am I looking for to replace?

sorry if it is hard to understand, I am not familiar with the terms.

[u mad?]

Post pics

[Covet]

2803628037

[Covet]

sorry, I don't have the internal picture right now...

[Vvvtec]

http://www.ozhonda.com/forum/attachment.php?attachmentid=28036&d=1429685957

http://www.ozhonda.com/forum/attachment.php?attachmentid=28037&d=1429685973

no worries boonga

http://www.ozhonda.com/forum/customavatars/avatar30053_106.gif

[RenzokukenJ]

fark dat looks fukin gammin cuz, hope yous got da gunyans involved ay

fukin lucky u lot dat u kunts are fukin gubbas coz dem gunyans would blame us black fellas for dat shit

[grifty]

replace the bonnet and see how it fits, should be right

[Renaissance_x]

You could try bending it straight with some vice grips just for a temporary fix til you can get a new bonnet could even try smacking it straight with a hammer.

[Renaissance_x]

Thanks for the bad rep renzo however as for a 'hammer just making it worse' or whatever you claim..

My crown section of metal pushed in near one of the rear tail lights so much so that there was half an inch panel gap all around where the tail light would be.

I straightened it with a selection of hammers and other tools very slowly and now you can barely even tell it was ever damaged... Will post pics later.

[RenzokukenJ]

So just using a hammer will straighten metal out?

You are sure that's a good idea?

Try it on a bent piece of metal with no backing and let me know how you go

[Renaissance_x]

You do realise panel beaters use hammers and dollies to straighten metal? I help oup a mate who owns a panel beatinbg buisness and he has taught me a few things so I know what I'm talking about.

28038

That bonnet is so bent almost anything could make it better... I gaurantee I could make it straighter by just taking the bonnet off and using just a hammer and some vice grips.

[RenzokukenJ]

You do realise panel beaters use hammers and dollies to straighten metal? I help oup a mate who owns a panel beatinbg buisness and he has taught me a few things so I know what I'm talking about.

http://www.ozhonda.com/forum/attachment.php?attachmentid=28038&stc=1

you are worse than SPMR

[Renaissance_x]

You are a ****ing idiot. Get the **** off this website!

You don't even need a backing usually until you have pushed out most of the metal...
And in this case you wouldn't even be trying to get it perfect so there's no need.

[RenzokukenJ]

You are a ****ing idiot. Get the **** off this website!

You don't even need a backing usually until you have pushed out most of the metal...
And in this case you wouldn't even be trying to get it perfect so there's no need.

lol met i think you need to calm down eh, smoke a blunt and sip a goon bag

smacking metal gonna bend it brudda, need someting hard like me garra stiff after lookin at lullis

[Renaissance_x]

bending its the idea... bend it back into shape..

[RenzokukenJ]

bending its the idea... bend it back into shape..

its already bent

it need to be straight

thats the idea

[Renaissance_x]

Yeah it needs to be bent straight or just straighter than what it is.

[cbauto]

you are worse than SPMR

nh, SPMR charges money

Harry's bad advice is free.

[Renaissance_x]

I gaurantee I could fix that with a hammer.

[SHOGUNOVDDRK]

Covet, post better photos ffs!

I can see your radiator support is out of shape near the headlight but it looks like you may have been lucky.

[cbauto]

I gaurantee I could fix that with a hammer.

I'm sure you're good with a hammer.

[Renaissance_x]

I could get it into good enough shape to close the bonnet a bit better making it less likely to get pulled over.

[cbauto]

I could get it into good enough shape to close the bonnet a bit better making it less likely to get pulled over.

what would you rather, bash bonnet back into place or bash jums face back into place.

[RenzokukenJ]

i think rennie had a hammer to the head

[RenzokukenJ]

what would you rather, bash bonnet back into place or bash jums face back into place.

fukin cave ya head in u blak DAWG

[cbauto]

fukin cave ya head in u blak DAWG

lol

mud much.

almost as mud as SPMR

almost as mud as pop

lmao

[RenzokukenJ]

lol

mud much.

almost as mud as SPMR

almost as mud as pop

lmao

noongar vs martu tribe

[cbauto]

noongar vs martu tribe
http://www.abc.net.au/news/image/4230880-3x2-940x627.jpg




























































































http://i.ytimg.com/vi/6LmY_wNErYk/hqdefault.jpg

[RenzokukenJ]

http://www.abc.net.au/news/image/4230880-3x2-940x627.jpg




























































































http://i.ytimg.com/vi/6LmY_wNErYk/hqdefault.jpg
Das my fukin aunty u kunt

U BLAK DAWG

[carayan]

http://i0.kym-cdn.com/photos/images/newsfeed/000/029/970/trainn.jpg?1260328965

[RenzokukenJ]

http://i0.kym-cdn.com/photos/images/newsfeed/000/029/970/trainn.jpg?1260328965


fukin ay u yellow fuk, how da fuk u say ur name eh

why you not have blak fellas name like nigel

u fukin one of dem funny speakin kunts or wut