View Full Version : My new DIY today......
brightboyfree
15-04-2005, 12:20 AM
My DIY Instruction: 3 EASY STEP
1st: choose the image you want to stick on, then use Photo chop software to resize the image to suitable size. And print it on the normal paper.
http://img152.echo.cx/img152/2567/17oc1.jpg
http://img152.echo.cx/img152/6361/28yj1.jpg
http://img152.echo.cx/img152/1851/31bi.jpg
2nd: Open the third brake light cover, then cut that paper to suitable size.
http://img152.echo.cx/img152/6586/44bx.jpg
http://img152.echo.cx/img152/3687/55ro.jpg
http://img152.echo.cx/img152/5900/64zz.jpg
http://img152.echo.cx/img152/5753/76rc.jpg
3rd: After you get the actual size of that brake light, then print it on projecter film and cut it to suitable size.
http://img152.echo.cx/img152/3650/88uf.jpg
http://img152.echo.cx/img152/2852/90wk.jpg
http://img152.echo.cx/img152/9651/106vt.jpg
http://img152.echo.cx/img152/7886/118gx1.jpg
Congratulations, All Done!!:thumbsup:
http://img152.echo.cx/img152/5338/121ma.jpg
http://img152.echo.cx/img152/5167/137mq.jpg
http://img152.echo.cx/img152/9311/143az.jpg
http://img152.echo.cx/img152/4539/156mq.jpg
See large photo --> http://www.photopostit.com/brightboyfree
MRFIT
15-04-2005, 12:22 AM
cool...... are they stickers? very clever.....
DavidLing
15-04-2005, 12:23 AM
i did think about this idea b4, but i worry that may look ugly at the day time, so i give it up!!
brightboyfree
15-04-2005, 12:33 AM
i did think about this idea b4, but i worry that my look ugly at the day time, so i give it up!!
i had that idea 1 year ago, and worry about that too, but i try today, it's very good look, since i got window tinting...:D
MRFIT
15-04-2005, 12:34 AM
did u take any pic of the steps of how u did it?
DavidLing
15-04-2005, 12:37 AM
i had that idea 1 year ago, and worry about that too, but i try today, it's very good look, since i got window tinting...:D
Yes! i wanna know too, what material did u use? and can u take some pic at the day time when the brake light is not on??
TypeG
15-04-2005, 12:41 AM
look good
Q_ball
15-04-2005, 12:43 AM
thats pretty cool...how about a write up of how u did that! :D
brightboyfree
15-04-2005, 12:52 AM
Ok, I'll make a instruction with day time photos........;)
spoon fit
15-04-2005, 06:03 AM
look ok. if green light, look better
ViHatcher
15-04-2005, 07:28 AM
Is that legal to do for street use?
Philip Lee
15-04-2005, 09:24 AM
did u cut out from your window tint??
to get to that area is easy. remove the plastic cover of the 3rd brake light and there're 2 screws to remove & that's it.
I think its a transparent sticker that has the word 'fitta'er' as clear and the rest darkened out. The whole brake light isn't as bright other than the word itself.
brightboyfree
15-04-2005, 03:10 PM
I think its a transparent sticker that has the word 'fitta'er' as clear and the rest darkened out. The whole brake light isn't as bright other than the word itself.
yes, that's what i've done...:thumbsup:
JDM.Power
15-04-2005, 03:19 PM
looks cool! an well done on doin it
FR33K
15-04-2005, 03:39 PM
there was a thread on this a few months back
but for those who havent seen it
here's mine..
http://img.photobucket.com/albums/v110/FR33K/b2_1.jpg
panda[cRx]
15-04-2005, 03:44 PM
ooooh i am so doin a 'panda' or 'crx' one! :D
Philip Lee
15-04-2005, 04:12 PM
transparent sticker???
the words on the sticker are transparent... in other words clear whereas the surrounding that is around the word is a darker colour - like a darker tint. So when the brake light goes off... it is dulled and not as bright but the word itself is bright as that part of the sticker is clear and not tinted - its like extra tinting
JASMA
15-04-2005, 06:34 PM
i did think about this idea b4, but i worry that may look ugly at the day time, so i give it up!!
hey david, this is henry from sydney~:D
welcome to OH mate
brightboyfree
16-04-2005, 01:13 AM
there was a thread on this a few months back
but for those who havent seen it
here's mine..
http://img.photobucket.com/albums/v110/FR33K/b2_1.jpg
Haha, u have a good one too...:thumbsup:
**Ghost**
16-04-2005, 01:27 AM
I'm so doing this... where can i get this magic paper from?
DavidLing
16-04-2005, 03:25 AM
hey david, this is henry from sydney~:D
welcome to OH mate
Hi!! Henry! you are the Henry from RHS???
brightboyfree
16-04-2005, 10:53 PM
My DIY Instruction......:thumbsup:
Check the first page!!:D
spoon fit
16-04-2005, 11:26 PM
:thumbsup: :thumbsup: :thumbsup:
have u seen spec-r jazz "modulo" one?
NeoNode
17-04-2005, 02:27 PM
And another :p
http://users.bigpond.net.au/kevingou/mod1.jpg
http://users.bigpond.net.au/kevingou/mod2.jpg
DavidLing
17-04-2005, 02:43 PM
cool!! where i can get the material??
Philip Lee
18-04-2005, 11:24 AM
cool!! where i can get the material??
this is my question too.
asiansquad
18-04-2005, 01:42 PM
i'm guessing it'll be office works
DavidLing
18-04-2005, 03:17 PM
and how to stick on the light? using glue??
i wouldnt mind something like "back off"
DavidLing
18-04-2005, 11:30 PM
i will put a word "CAUTION!" or in Chinese "注意!" ha ha!!
and using transparence blue colour material to made the word, so when the brake light on, u can see the word in Purple colour (REd + Blue = Purple)! ha ha!:D
MRFIT
18-04-2005, 11:39 PM
My DIY Instruction......:thumbsup:
Check the first page!!:D
opps.... image not working.... :(
brightboyfree
19-04-2005, 08:35 AM
opps.... image not working.... :(
Check the first page again, it should be work now...
awesome work mate, looks cool.
DIY = :thumbsup:
How come you still used the paper when u have the transparent one?
Also did you use glue to stick it to your brake light?
TypeG
19-04-2005, 10:44 AM
what printe is needed in order to print on those papers?
brightboyfree
19-04-2005, 07:37 PM
How come you still used the paper when u have the transparent one?
Also did you use glue to stick it to your brake light?
I only use tape to stick on at the moment...i'll be use other material to stick it...
brightboyfree
19-04-2005, 07:40 PM
what printe is needed in order to print on those papers?
if your print does not support to print projector firm, u may print it on the paper first, then bring that paper to somewhere that can copy it to projector firm (such as your uni)...
I only use type to stick on at the moment...i'll be use other material to stick it...
type = tape?
MRFIT
19-04-2005, 11:22 PM
thanks.... the images are working now..... well done , very nice job indeed.....
DavidLing
19-04-2005, 11:42 PM
type = tape?
A-ya!! he means sticky tape la, of course! he he! :D
brightboyfree
19-04-2005, 11:50 PM
type = tape?
of course la, hehe....:D
Q_ball
19-04-2005, 11:57 PM
nice work there!!
A'PEXi
19-04-2005, 11:59 PM
want to help me make one lol? my printer cant print on plastic i dun think :(
brightboyfree
20-04-2005, 12:00 AM
want to help me make one lol? my printer cant print on plastic i dun think :(]
are u in brisbane???if yes just send me a pm...
brightboyfree
20-04-2005, 12:01 AM
thanks for looking guys....:p
Nodachi
20-04-2005, 12:02 AM
chinese window xp?:D
brightboyfree
20-04-2005, 12:06 AM
chinese window xp?:D
haha....yes.......:D
A'PEXi
20-04-2005, 12:08 AM
pm'ed you :D
DavidLing
20-04-2005, 12:29 AM
if your print does not support to print projector firm, u may print it on the paper first, then bring that paper to somewhere that can copy it to projector firm (such as your uni)...
do u know laser printer can print on plastic or not?
brightboyfree
20-04-2005, 12:31 AM
do u know laser printer can print on plastic or not?
yes..........
DavidLing
20-04-2005, 12:32 AM
BTW, can u take some photos of your 3rd brake light at the day time? I wanna know what does it look like under the sun! Thanks!
brightboyfree
20-04-2005, 12:34 AM
BTW, can u take some photos of your 3rd brake light at the day time? I wanna know what does it look like under the sun! Thanks!
tomorrow ba....:)
DavidLing
20-04-2005, 12:35 AM
tomorrow ba....:)
Thank you so much!! :D
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.