PDA

View Full Version : Aftermarket Radiator For EG's



TYPE-ONE
15-04-2005, 11:44 PM
Does any Australian Brands make aftermarket aluminium radiators for EG civic. Like Semi-race Kinda ones. Like Koyo but not with the extreme Price Tag. Any help would be appreciated.

PhatSol
16-04-2005, 12:33 AM
PWR makes one don't they? Are there any local shops that can make you a custom one?

type one
16-04-2005, 09:57 AM
for what purpose is this radiator going to be used for - because the brand u named (Koyo) is race specific, so if u want something race orientated you may not be able to get something "cheap".

otherwise there is nothing wrong with a Honda OEM even for a race orientated car.

LatinoHatchCrap
16-04-2005, 11:31 AM
For an EG with a bseries motor a dual core radiator from a 2nd gen CRX will do. This a straight bolt on.
You can also try to fit an integra radiator but you'll need custom mounts and to run AC you'll have to play aorund a bit with it.

garett
16-04-2005, 11:59 AM
dont you have a twin core???

if your getting a new radiatior mate, ill buy yours if its twin core... i cant remember

TYPE-ONE
18-04-2005, 06:21 PM
ok thanks for the replies. prolli just go for oem. and not be cool

Psyklops
13-11-2005, 09:53 AM
just curious....what do eg radiators cost these days...brand new, and second hand? I had the top plastic (!) pipe (that the top hose connects to) crumble on me when I was removing the hoses for replacement...on a friggin sunday too! no wreckers open or anything remotely useful to me...have to wait until tomorrow i guess..if I get a chance...:(

sivic
13-11-2005, 03:01 PM
honda ones can be pricey new. expect to pay anywhere between $100 to $200 for one from a wrecker depending on condition.
same thing happened to me. i got a 2nd hand one in good nick for ~ $150.
if you want an aluminium one try the yellow pages. theres a few in there that do them

Psyklops
13-11-2005, 08:57 PM
cheers for that

eg_08_wa
13-11-2005, 11:58 PM
go to lf performance in welshpool type one they make anything u want pratically price wise not sure haha call and find out

sivic
14-11-2005, 01:19 AM
nah no point in getting a custom made one when you can get them off the shelf.
from memory i was quoted ~ $350 for an aluminium one for an EG from ADRAD

ah8118
14-11-2005, 03:23 AM
i heard pwr makes reall good radiators... maybe u should give them a ring and ask for a qoute?

Psyklops
15-11-2005, 09:53 AM
in the meantime I am getting mine reco-d...$140 for a clean, new top tank and pressure test...they even give them a lick of paint too...if this one dies on me again..then I will investigate an all metal construction replacement...but if the top tank is new....it shouldn't be a problem for a few years with the plastic going brittle and crumbling again

dcdc
17-11-2005, 12:30 AM
I read somewhere the PWR and Koyos are twice as thick as stock...