Mad Noob D series action

[kaws]

hey guys,

I'm a Nissan and Holden nerd, but after selling my 260z Im trying to get into a small fun car I can work on myself. I'm looking at either a dual carb EF or EG, preferably the EG as there is way more parts available.

I know the breeze comes with the 1.5lt dual carb, but I was wondering if there were any other models I should be looking at? I've seen a few Mini-Me threads, but I dont know how it goes with the carb motors. Is there a build you guys know of that is a dual carb DOHC head? I'm pretty keen on carbs as I've got some good parts here and want to build something silly I can tune myself. I just need to keep the carbs and at least get some DOHC or some more power action.

I'm also keen on the brake upgrades, I can see that the EG SLI rear brakes will work, is there a cheap front brake upgrade for EGs?

[amant02]

Yea you can use brakes from EK4/DC2R or even re drill mini rotors with calipers from DC2R.

Dont forget to get the brake booster etc.

[3K9]

i know the breeze comes with the 1.5lt dual carb


edit: 1.3l

[Hondarally]

There's a reason there are few if any carby DOHC honda projects out there. The EFI gives a better power spread, uses less fuel, has lower emissions, is more driveable and reliable.

I grew up on a diet of weber / dellorto fed datsun rally cars and since going to efi haven't looked back. After my last abomination (51 IDA rx2 rally car) I never want to see another carby.

You can pick up a b16/b18 converted eg for $2-3k, or a vti-r integra for similar. They are a great drive straight out of the box, and with some suspension and engine tweaks are a lot of fun.

[Austro]

If you look up Street Level Tuning on Facebook (they're based in Adelaide), they have an ED6 running a dual carb D16A8.

https://scontent-syd1-1.xx.fbcdn.net/hphotos-xap1/v/t1.0-9/p720x720/12074766_1023182411054957_6940853257846166243_n.jp g?oh=416692af5f16a2866a95dbdf1c6d2488&oe=56F1B6EA

[bennjamin]

Almost spent coin on that setup in an old Eg I had - would of sounded gorgeous.
Also you can use a (cable?) b series gearbox / driveshafts with that motor.