Removal of Throttle body

[free2d]

Hi,

I got a Honda CL7R. I want to remove the throttle body out to make the diameter bigger.

I already taken out the 2 sensors, 2 bolts, 2 nuts, and 3 hoses. But I still cant pull it out. Is there any adhesive on the gasket between the throttle body and intake manifold?

Please help

[tinkerbell]

yes.

careful not to damage the mating surface when you use a screw driver to try to pry it off...

make sure you remove all bolts and screws before you try to prise it off.

make sure you replace the old gasket with a new one...