Converting EK4 vtir engine to EK1 D16

[khmen09]

Hey guys. Just wondering what's the key components in swap the b16a off an Ek4 to an ek1. I found an ek4 for sale and was thinking of converting it with a mate of mine. Anything in particular I need to get.

Thanks on advanced

[grifty]

grab everything including the engine harness and the rear gearbox + bracket, probably also need the clutch line.

Run a CRV A/C compressor bracket in order to use the D series AC compressor on the B16

Also use the EK4 High pressure P/S line + pump.

It's a straight forward drop in.

You'll need to run the EK4 ECU and you also need to remove the immobiliser form the ECU, there's a DIY on here on how to do it.

[subie]

great info