View Full Version : 4x100 to 5x114.3
Lukey
19-03-2016, 07:16 PM
hey guise
heard somewhere that going from 4x100 to 5x114.3 increases track width slightly, cant seem to find any info and am trying to confirm
thanks
car is dc4 btw
Daveho1
19-03-2016, 07:30 PM
Really is going to depend on the wheels u end up with
Lukey
19-03-2016, 08:30 PM
Really is going to depend on the wheels u end up with
disregarding wheels is what i meant, i heard it increases track width.
so if you run same width and offset wheels with same size tyre the 5x114.3 will sit slightly out more/wider than the 4x100
SHOGUNOVDDRK
19-03-2016, 10:07 PM
Lukey, welcome to the dark side.. go hard son.
Oxer was the one whom encountered this issue.
IIRC it was approximately 10mm increase with the set up he went with.
Lukey
19-03-2016, 11:24 PM
Lukey, welcome to the dark side.. go hard son.
Oxer was the one whom encountered this issue.
IIRC it was approximately 10mm increase with the set up he went with.
lloyd! long time no talk chief
i thought it was ox, wasnt sure tho. 10mm per side, dang thats a fair bit. i might text him and ask what stuff he used
i plan on getting some knuckles shortened by a mate of mine so thought id investigate 5 stud swap. but if its gonna add 10mm per side i wont bother as im planning to eventually get some 8.5" wide wheels under it
SHOGUNOVDDRK
19-03-2016, 11:28 PM
lloyd! long time no talk chief
i thought it was ox, wasnt sure tho. 10mm per side, dang thats a fair bit. i might text him and ask what stuff he used
i plan on getting some knuckles shortened by a mate of mine so thought id investigate 5 stud swap. but if its gonna add 10mm per side i wont bother as im planning to eventually get some 8.5" wide wheels under it
Hehe I'll be back chief.
Your thoughts were right and it was discussed briefly in his thread on Spam|Works.
Ukley I'd ruv to see you fi stunnin, do it lad!
In4gtrwheelfitment
Lukey
19-03-2016, 11:33 PM
Hehe I'll be back chief.
Your thoughts were right and it was discussed briefly in his thread on Spam|Works.
Ukley I'd ruv to see you fi stunnin, do it lad!
In4gtrwheelfitment
if it increases track width at all im not gonna do it lol
Lukey
20-03-2016, 03:54 PM
spoke to ox, he said it increased track width 12mm per side.
might investigate 4x114.3
Renaissance_x
20-03-2016, 04:20 PM
Or a willwood brake kit.
Lukey
20-03-2016, 08:21 PM
Or a willwood brake kit.
why??
u mad?
20-03-2016, 08:26 PM
why??
Why do you want to go to 5 stud?
cbauto
20-03-2016, 08:26 PM
increase 10mm toTAL.
stock offset of 4x100 vtir is +45
Stock offset of dc2r is +50
they increased 5mm per side to compensate for the track increase of 10mm
AFAIK reading on the net.
cbauto
20-03-2016, 08:27 PM
Why do you want to go to 5 stud?
Or a willwood brake kit.
both of you just fuk up.
u mad?
20-03-2016, 09:09 PM
both of you just fuk up.
Bot, can you try to calm down.
curtis265
20-03-2016, 09:29 PM
hory shet its ulkey
Lukey
21-03-2016, 06:38 PM
Why do you want to go to 5 stud?
wheels
increase 10mm toTAL.
stock offset of 4x100 vtir is +45
Stock offset of dc2r is +50
they increased 5mm per side to compensate for the track increase of 10mm
AFAIK reading on the net.
widths would be different aswell so you would need to take that into consideration. oxer said 12mm each side.
hory shet its ulkey
yes
RenzokukenJ
21-03-2016, 06:54 PM
Hi ulkey, I'm Ryan
cbauto
21-03-2016, 09:04 PM
widths would be different aswell so you would need to take that into consideration. oxer said 12mm each side.
u wot m8
what widths differ? penis width?
cbauto
21-03-2016, 09:06 PM
pics of 7 series
carayan
22-03-2016, 07:57 AM
can confirm front is off by 10mm compared to 4 stud. was confused when fit 8j +38 and it poked halfway to gundagai, then it kicked in. wheels are essentially +28 on the car.
rears iirc dont have any change, or none that i have noticed when going from 6.5j +45 to 7.5j +33, it still fits fine in the rear.
SHOGUNOVDDRK
22-03-2016, 11:25 AM
increase 10mm toTAL.
can confirm front is off by 10mm compared to 4 stud.
Gentleman
http://www.oshoapp.com/stickerapp/take%20a%20bow/4.jpg
oxer said 12mm each side.
Out of curiosity; did he say if he ran a crv front VS itr front?
Lukey
23-03-2016, 06:38 PM
u wot m8
what widths differ? penis width?
yes
pics of 7 series
got rid of that along time ago
can confirm front is off by 10mm compared to 4 stud. was confused when fit 8j +38 and it poked halfway to gundagai, then it kicked in. wheels are essentially +28 on the car.
rears iirc dont have any change, or none that i have noticed when going from 6.5j +45 to 7.5j +33, it still fits fine in the rear.
thanks for your input!
Gentleman
Out of curiosity; did he say if he ran a crv front VS itr front?
he said 10mm per side
oxer run itr setup
cbauto
23-03-2016, 06:57 PM
Why ask us. U already know
carayan
28-03-2016, 02:43 PM
crv 36mm is 8mm if i remember correctly
dc2r 32mm is 10mm
this is to make up for dat 4wd life etc
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.