PDA

View Full Version : Brake booster and master cylinder EK/EM what fits?



ROM30S
23-03-2016, 09:27 AM
recently I found a leak coming from the clutch pedal around the firewall entrance of the brake booster on my EK4.

would any on know from experience if this is the master cylininder or booster causing this?

Im prepaired to replace both as there not that expensive but I need to confirm.

do all EK vti-r,gli,cxi and vti hatch/sedan 96-00 share the same parts?

will EM1/EJ coupe fit and are the same?

thanks

bennjamin
23-03-2016, 10:10 AM
Your clutch master cylinder is likely leaking. Replace it with a new or good condition used item.
Not 100% sure but the clutch master cylinder should be compatible with all manual civics and integras 91-00.

ROM30S
23-03-2016, 10:27 AM
Thanks for the reply, Im gonna probably replace both since one is attached to the other.

I found a replacement from an EM1 vtir, im just unsure at the moment if they are the same so im getting the part numbers matched up later today.

Ill mention it in the post as Im sure others will find this information useful when they need to replace theirs.

ROM30S
24-03-2016, 06:21 AM
after closer inspection it is the clutch master cylinder.

the EM1 shares the same one with 5/8 marked on it.

u mad?
24-03-2016, 07:41 AM
.......

Daveho1
24-03-2016, 08:13 AM
Obviously clutch booster is ruined

MIKO_OL
24-03-2016, 09:29 PM
Compatible and will fit. just replace both while your at it. not exxy these days.