~Sp33~
03-04-2016, 12:21 PM
Hi Ozhonda.
I thought i'd post up some progress i've been making on some parts i've been working on.
A little while back i made a custom gauge mount for my EF sedan that replaced the driver side air vent. Originally i had it 3D printed, but i've since cast it in resin which means i could make a few from the same mold. This is what they turned out like:
http://i109.photobucket.com/albums/n58/sp3ed3/IMG_6451_zps5qglhn68.jpg
https://c2.staticflickr.com/2/1482/25578187773_ac34a7a12d_z.jpg
I'm going to start making them for CRX/hatch/wagon and then maybe EG/EK if there's enough interest.
I'm making this thread to keep track of progress and i guess see if anyone is interested in them.
I haven't worked out pricing yet. It'll depend on the costs of consumables and how much time goes into them.
First step will be to head to the wrecker and find myself a hatch driver side vent. Unless someone has one to donate to the cause? :)
If anyone is interested in buying a sedan one (suit 90-91 suit 52mm gauge only at this stage) PM me.
Steve.
I thought i'd post up some progress i've been making on some parts i've been working on.
A little while back i made a custom gauge mount for my EF sedan that replaced the driver side air vent. Originally i had it 3D printed, but i've since cast it in resin which means i could make a few from the same mold. This is what they turned out like:
http://i109.photobucket.com/albums/n58/sp3ed3/IMG_6451_zps5qglhn68.jpg
https://c2.staticflickr.com/2/1482/25578187773_ac34a7a12d_z.jpg
I'm going to start making them for CRX/hatch/wagon and then maybe EG/EK if there's enough interest.
I'm making this thread to keep track of progress and i guess see if anyone is interested in them.
I haven't worked out pricing yet. It'll depend on the costs of consumables and how much time goes into them.
First step will be to head to the wrecker and find myself a hatch driver side vent. Unless someone has one to donate to the cause? :)
If anyone is interested in buying a sedan one (suit 90-91 suit 52mm gauge only at this stage) PM me.
Steve.