Widget
26-05-2016, 12:10 PM
Hi guys,
doing the (front) brakes on my 2005 HONDA CRV, I removed the calipers and pins to clean/grease etc.. but didn't take note of which slide pin came from either top or bottom .. as it turns out, they're both different.
I've googled a bit and found conflicting answers as Honda seems to use different pins, depending on the year/model determines where each pin goes..
http://i998.photobucket.com/albums/af101/Widget1983/IMAG0065_zpspnvjdaqi.jpg
http://i998.photobucket.com/albums/af101/Widget1983/IMAG0063_zpsa63gklx9.jpg
One pin seems round with a rubber seal at the tip.. the other doesnt have the ribber tip.. but has 3x flat spots going lengthways (seen in pics)
Hope someone can help :)
doing the (front) brakes on my 2005 HONDA CRV, I removed the calipers and pins to clean/grease etc.. but didn't take note of which slide pin came from either top or bottom .. as it turns out, they're both different.
I've googled a bit and found conflicting answers as Honda seems to use different pins, depending on the year/model determines where each pin goes..
http://i998.photobucket.com/albums/af101/Widget1983/IMAG0065_zpspnvjdaqi.jpg
http://i998.photobucket.com/albums/af101/Widget1983/IMAG0063_zpsa63gklx9.jpg
One pin seems round with a rubber seal at the tip.. the other doesnt have the ribber tip.. but has 3x flat spots going lengthways (seen in pics)
Hope someone can help :)